Kubernetes driver

The Kubernetes driver lets you connect your local development or CI environments to builders in a Kubernetes cluster to allow access to more powerful compute resources, optionally on multiple native architectures.

Synopsis

Run the following command to create a new builder, named kube, that uses the Kubernetes driver:

$ docker buildx create \
  --bootstrap \
  --name=kube \
  --driver=kubernetes \
  --driver-opt=[key=value,...]

The following table describes the available driver-specific options that you can pass to --driver-opt:

Scaling BuildKit

One of the main advantages of the Kubernetes driver is that you can scale the number of builder replicas up and down to handle increased build load. Scaling is configurable using the following driver options:

• replicas=N

  This scales the number of BuildKit pods to the desired size. By default, it only creates a single pod. Increasing the number of replicas lets you take advantage of multiple nodes in your cluster.

• requests.cpu, requests.memory, requests.ephemeral-storage, limits.cpu, limits.memory, limits.ephemeral-storage

  These options allow requesting and limiting the resources available to each BuildKit pod according to the official Kubernetes documentation here.

For example, to create 4 replica BuildKit pods:

$ docker buildx create \
  --bootstrap \
  --name=kube \
  --driver=kubernetes \
  --driver-opt=namespace=buildkit,replicas=4

Listing the pods, you get this:

$ kubectl -n buildkit get deployments
NAME    READY   UP-TO-DATE   AVAILABLE   AGE
kube0   4/4     4            4           8s

$ kubectl -n buildkit get pods
NAME                     READY   STATUS    RESTARTS   AGE
kube0-6977cdcb75-48ld2   1/1     Running   0          8s
kube0-6977cdcb75-rkc6b   1/1     Running   0          8s
kube0-6977cdcb75-vb4ks   1/1     Running   0          8s
kube0-6977cdcb75-z4fzs   1/1     Running   0          8s

Additionally, you can use the loadbalance=(sticky|random) option to control the load-balancing behavior when there are multiple replicas. random selects random nodes from the node pool, providing an even workload distribution across replicas. sticky (the default) attempts to connect the same build performed multiple times to the same node each time, ensuring better use of local cache.

For more information on scalability, see the options for docker buildx create.

Node assignment

The Kubernetes driver allows you to control the scheduling of BuildKit pods using the nodeSelector and tolerations driver options. You can also set the schedulername option if you want to use a custom scheduler altogether.

You can use the annotations and labels driver options to apply additional metadata to the deployments and pods that's hosting your builders.

The value of the nodeSelector parameter is a comma-separated string of key-value pairs, where the key is the node label and the value is the label text. For example: "nodeselector=kubernetes.io/arch=arm64"

The tolerations parameter is a semicolon-separated list of taints. It accepts the same values as the Kubernetes manifest. Each tolerations entry specifies a taint key and the value, operator, or effect. For example: "tolerations=key=foo,value=bar;key=foo2,operator=exists;key=foo3,effect=NoSchedule"

These options accept CSV-delimited strings as values. Due to quoting rules for shell commands, you must wrap the values in single quotes. You can even wrap all of --driver-opt in single quotes, for example:

$ docker buildx create \
  --bootstrap \
  --name=kube \
  --driver=kubernetes \
  '--driver-opt="nodeselector=label1=value1,label2=value2","tolerations=key=key1,value=value1"'

Multi-platform builds

The Kubernetes driver has support for creating multi-platform images, either using QEMU or by leveraging the native architecture of nodes.

QEMU

Like the docker-container driver, the Kubernetes driver also supports using QEMU (user mode) to build images for non-native platforms. Include the --platform flag and specify which platforms you want to output to.

For example, to build a Linux image for amd64 and arm64:

$ docker buildx build \
  --builder=kube \
  --platform=linux/amd64,linux/arm64 \
  -t <user>/<image> \
  --push .

警告

QEMU performs full-CPU emulation of non-native platforms, which is much slower than native builds. Compute-heavy tasks like compilation and compression/decompression will likely take a large performance hit.

Using a custom BuildKit image or invoking non-native binaries in builds may require that you explicitly turn on QEMU using the qemu.install option when creating the builder:

$ docker buildx create \
  --bootstrap \
  --name=kube \
  --driver=kubernetes \
  --driver-opt=namespace=buildkit,qemu.install=true

Native

If you have access to cluster nodes of different architectures, the Kubernetes driver can take advantage of these for native builds. To do this, use the --append flag of docker buildx create.

First, create your builder with explicit support for a single architecture, for example amd64:

$ docker buildx create \
  --bootstrap \
  --name=kube \
  --driver=kubernetes \
  --platform=linux/amd64 \
  --node=builder-amd64 \
  --driver-opt=namespace=buildkit,nodeselector="kubernetes.io/arch=amd64"

This creates a Buildx builder named kube, containing a single builder node named builder-amd64. Assigning a node name using --node is optional. Buildx generates a random node name if you don't provide one.

Note that the Buildx concept of a node isn't the same as the Kubernetes concept of a node. A Buildx node in this case could connect multiple Kubernetes nodes of the same architecture together.

With the kube builder created, you can now introduce another architecture into the mix using --append. For example, to add arm64:

$ docker buildx create \
  --append \
  --bootstrap \
  --name=kube \
  --driver=kubernetes \
  --platform=linux/arm64 \
  --node=builder-arm64 \
  --driver-opt=namespace=buildkit,nodeselector="kubernetes.io/arch=arm64"

Listing your builders shows both nodes for the kube builder:

$ docker buildx ls
NAME/NODE       DRIVER/ENDPOINT                                         STATUS   PLATFORMS
kube            kubernetes
  builder-amd64 kubernetes:///kube?deployment=builder-amd64&kubeconfig= running  linux/amd64*, linux/amd64/v2, linux/amd64/v3, linux/386
  builder-arm64 kubernetes:///kube?deployment=builder-arm64&kubeconfig= running  linux/arm64*

You can now build multi-arch amd64 and arm64 images, by specifying those platforms together in your build command:

$ docker buildx build --builder=kube --platform=linux/amd64,linux/arm64 -t <user>/<image> --push .

You can repeat the buildx create --append command for as many architectures that you want to support.

Rootless mode

The Kubernetes driver supports rootless mode. For more information on how rootless mode works, and it's requirements, see here.

To turn it on in your cluster, you can use the rootless=true driver option:

$ docker buildx create \
  --name=kube \
  --driver=kubernetes \
  --driver-opt=namespace=buildkit,rootless=true

This will create your pods without securityContext.privileged.

Requires Kubernetes version 1.19 or later. Using Ubuntu as the host kernel is recommended.

Example: Creating a Buildx builder in Kubernetes

This guide shows you how to:

• Create a namespace for your Buildx resources
• Create a Kubernetes builder.
• List the available builders
• Build an image using your Kubernetes builders

Prerequisites:

• You have an existing Kubernetes cluster. If you don't already have one, you can follow along by installing minikube.
• The cluster you want to connect to is accessible via the kubectl command, with the KUBECONFIG environment variable set appropriately if necessary.

1. Create a buildkit namespace.

   Creating a separate namespace helps keep your Buildx resources separate from other resources in the cluster.

   $ kubectl create namespace buildkit
   namespace/buildkit created
   

2. Create a new builder with the Kubernetes driver:

   $ docker buildx create \
     --bootstrap \
     --name=kube \
     --driver=kubernetes \
     --driver-opt=namespace=buildkit
   

   メモ

   Remember to specify the namespace in driver options.

3. List available builders using docker buildx ls

   $ docker buildx ls
   NAME/NODE                DRIVER/ENDPOINT STATUS  PLATFORMS
   kube                     kubernetes
     kube0-6977cdcb75-k9h9m                 running linux/amd64, linux/amd64/v2, linux/amd64/v3, linux/386
   default *                docker
     default                default         running linux/amd64, linux/386
   

4. Inspect the running pods created by the build driver with kubectl.

   $ kubectl -n buildkit get deployments
   NAME    READY   UP-TO-DATE   AVAILABLE   AGE
   kube0   1/1     1            1           32s
   
   $ kubectl -n buildkit get pods
   NAME                     READY   STATUS    RESTARTS   AGE
   kube0-6977cdcb75-k9h9m   1/1     Running   0          32s
   

   The build driver creates the necessary resources on your cluster in the specified namespace (in this case, buildkit), while keeping your driver configuration locally.

5. Use your new builder by including the --builder flag when running buildx commands. For example: :

   # Replace <registry> with your Docker username
   # and <image> with the name of the image you want to build
   docker buildx build \
     --builder=kube \
     -t <registry>/<image> \
     --push .
   

That's it: you've now built an image from a Kubernetes pod, using Buildx.

Further reading

For more information on the Kubernetes driver, see the buildx reference.