コンテナーを利用した Go 言語の開発
Prerequisites
Work through the steps of the run your image as a container module to learn how to manage the lifecycle of your containers.
Introduction
In this module, you'll take a look at running a database engine in a container and connecting it to the extended version of the example application. You are going to see some options for keeping persistent data and for wiring up the containers to talk to one another. Finally, you'll learn how to use Docker Compose to manage such multi-container local development environments effectively.
Local database and containers
The database engine you are going to use is called CockroachDB. It is a modern, Cloud-native, distributed SQL database.
Instead of compiling CockroachDB from the source code or using the operating system's native package manager to install CockroachDB, you are going to use the Docker image for CockroachDB and run it in a container.
CockroachDB is compatible with PostgreSQL to a significant extent, and shares many conventions with the latter, particularly the default names for the environment variables. So, if you are familiar with Postgres, don't be surprised if you see some familiar environment variables names. The Go modules that work with Postgres, such as pgx, pq, GORM, and upper/db also work with CockroachDB.
For more information on the relation between Go and CockroachDB, refer to the CockroachDB documentation, although this isn't necessary to continue with the present guide.
Storage
The point of a database is to have a persistent store of data. Volumes are the preferred mechanism for persisting data generated by and used by Docker containers. Thus, before you start CockroachDB, create the volume for it.
To create a managed volume, run :
$ docker volume create roach
roach
You can view the list of all managed volumes in your Docker instance with the following command:
$ docker volume list
DRIVER VOLUME NAME
local roach
Networking
The example application and the database engine are going to talk to one another over the network. There are different kinds of network configuration possible, and you're going to use what's called a user-defined bridge network. It is going to provide you with a DNS lookup service so that you can refer to your database engine container by its hostname.
The following command creates a new bridge network named mynet
:
$ docker network create -d bridge mynet
51344edd6430b5acd121822cacc99f8bc39be63dd125a3b3cd517b6485ab7709
As it was the case with the managed volumes, there is a command to list all networks set up in your Docker instance:
$ docker network list
NETWORK ID NAME DRIVER SCOPE
0ac2b1819fa4 bridge bridge local
51344edd6430 mynet bridge local
daed20bbecce host host local
6aee44f40a39 none null local
Your bridge network mynet
has been created successfully. The other three networks, named bridge
, host
, and none
are the default networks and they had been created by the Docker itself. While it's not relevant to this guide, you can learn more about Docker networking in the
networking overview section.
Choose good names for volumes and networks
As the saying goes, there are only two hard things in Computer Science: cache invalidation and naming things. And off-by-one errors.
When choosing a name for a network or a managed volume, it's best to choose a name that's indicative of the intended purpose. This guide aims for brevity, so it used short, generic names.
Start the database engine
Now that the housekeeping chores are done, you can run CockroachDB in a container and attach it to the volume and network you had just created. When you run the following command, Docker will pull the image from Docker Hub and run it for you locally:
$ docker run -d \
--name roach \
--hostname db \
--network mynet \
-p 26257:26257 \
-p 8080:8080 \
-v roach:/cockroach/cockroach-data \
cockroachdb/cockroach:latest-v20.1 start-single-node \
--insecure
# ... output omitted ...
Notice a clever use of the tag latest-v20.1
to make sure that you're pulling the latest patch version of 20.1. The diversity of available tags depend on the image maintainer. Here, your intent was to have the latest patched version of CockroachDB while not straying too far away from the known working version as the time goes by. To see the tags available for the CockroachDB image, you can go to the
CockroachDB page on Docker Hub.
Configure the database engine
Now that the database engine is live, there is some configuration to do before your application can begin using it. Fortunately, it's not a lot. You must:
- Create a blank database.
- Register a new user account with the database engine.
- Grant that new user access rights to the database.
You can do that with the help of CockroachDB built-in SQL shell. To start the SQL shell in the same container where the database engine is running, type:
$ docker exec -it roach ./cockroach sql --insecure
In the SQL shell, create the database that the example application is going to use:
CREATE DATABASE mydb;
Register a new SQL user account with the database engine. Use the username
totoro
.CREATE USER totoro;
Give the new user the necessary permissions:
GRANT ALL ON DATABASE mydb TO totoro;
Type
quit
to exit the shell.
The following is an example of interaction with the SQL shell.
$ sudo docker exec -it roach ./cockroach sql --insecure
#
# Welcome to the CockroachDB SQL shell.
# All statements must be terminated by a semicolon.
# To exit, type: \q.
#
# Server version: CockroachDB CCL v20.1.15 (x86_64-unknown-linux-gnu, built 2021/04/26 16:11:58, go1.13.9) (same version as client)
# Cluster ID: 7f43a490-ccd6-4c2a-9534-21f393ca80ce
#
# Enter \? for a brief introduction.
#
root@:26257/defaultdb> CREATE DATABASE mydb;
CREATE DATABASE
Time: 22.985478ms
root@:26257/defaultdb> CREATE USER totoro;
CREATE ROLE
Time: 13.921659ms
root@:26257/defaultdb> GRANT ALL ON DATABASE mydb TO totoro;
GRANT
Time: 14.217559ms
root@:26257/defaultdb> quit
oliver@hki:~$
Meet the example application
Now that you have started and configured the database engine, you can switch your attention to the application.
The example application for this module is an extended version of docker-gs-ping
application you've used in the previous modules. You have two options:
- You can update your local copy of
docker-gs-ping
to match the new extended version presented in this chapter; or - You can clone the docker/docker-gs-ping-dev repository. This latter approach is recommended.
To checkout the example application, run:
$ git clone https://github.com/docker/docker-gs-ping-dev.git
# ... output omitted ...
The application's main.go
now includes database initialization code, as well as the code to implement a new business requirement:
- An HTTP
POST
request to/send
containing a{ "value" : string }
JSON must save the value to the database.
You also have an update for another business requirement. The requirement was:
- The application responds with a text message containing a heart symbol ("
<3
") on requests to/
.
And now it's going to be:
The application responds with the string containing the count of messages stored in the database, enclosed in the parentheses.
Example output:
Hello, Docker! (7)
The full source code listing of main.go
follows.
package main
import (
"context"
"database/sql"
"fmt"
"log"
"net/http"
"os"
"github.com/cenkalti/backoff/v4"
"github.com/cockroachdb/cockroach-go/v2/crdb"
"github.com/labstack/echo/v4"
"github.com/labstack/echo/v4/middleware"
)
func main() {
e := echo.New()
e.Use(middleware.Logger())
e.Use(middleware.Recover())
db, err := initStore()
if err != nil {
log.Fatalf("failed to initialize the store: %s", err)
}
defer db.Close()
e.GET("/", func(c echo.Context) error {
return rootHandler(db, c)
})
e.GET("/ping", func(c echo.Context) error {
return c.JSON(http.StatusOK, struct{ Status string }{Status: "OK"})
})
e.POST("/send", func(c echo.Context) error {
return sendHandler(db, c)
})
httpPort := os.Getenv("HTTP_PORT")
if httpPort == "" {
httpPort = "8080"
}
e.Logger.Fatal(e.Start(":" + httpPort))
}
type Message struct {
Value string `json:"value"`
}
func initStore() (*sql.DB, error) {
pgConnString := fmt.Sprintf("host=%s port=%s dbname=%s user=%s password=%s sslmode=disable",
os.Getenv("PGHOST"),
os.Getenv("PGPORT"),
os.Getenv("PGDATABASE"),
os.Getenv("PGUSER"),
os.Getenv("PGPASSWORD"),
)
var (
db *sql.DB
err error
)
openDB := func() error {
db, err = sql.Open("postgres", pgConnString)
return err
}
err = backoff.Retry(openDB, backoff.NewExponentialBackOff())
if err != nil {
return nil, err
}
if _, err := db.Exec(
"CREATE TABLE IF NOT EXISTS message (value TEXT PRIMARY KEY)"); err != nil {
return nil, err
}
return db, nil
}
func rootHandler(db *sql.DB, c echo.Context) error {
r, err := countRecords(db)
if err != nil {
return c.HTML(http.StatusInternalServerError, err.Error())
}
return c.HTML(http.StatusOK, fmt.Sprintf("Hello, Docker! (%d)\n", r))
}
func sendHandler(db *sql.DB, c echo.Context) error {
m := &Message{}
if err := c.Bind(m); err != nil {
return c.JSON(http.StatusInternalServerError, err)
}
err := crdb.ExecuteTx(context.Background(), db, nil,
func(tx *sql.Tx) error {
_, err := tx.Exec(
"INSERT INTO message (value) VALUES ($1) ON CONFLICT (value) DO UPDATE SET value = excluded.value",
m.Value,
)
if err != nil {
return c.JSON(http.StatusInternalServerError, err)
}
return nil
})
if err != nil {
return c.JSON(http.StatusInternalServerError, err)
}
return c.JSON(http.StatusOK, m)
}
func countRecords(db *sql.DB) (int, error) {
rows, err := db.Query("SELECT COUNT(*) FROM message")
if err != nil {
return 0, err
}
defer rows.Close()
count := 0
for rows.Next() {
if err := rows.Scan(&count); err != nil {
return 0, err
}
rows.Close()
}
return count, nil
}
The repository also includes the Dockerfile
, which is almost exactly the same as the multi-stage Dockerfile
introduced in the previous modules. It uses the official Docker Go image to build the application and then builds the final image by placing the compiled binary into the much slimmer, distroless image.
Regardless of whether you had updated the old example application, or checked out the new one, this new Docker image has to be built to reflect the changes to the application source code.
Build the application
You can build the image with the familiar build
command:
$ docker build --tag docker-gs-ping-roach .
Run the application
Now, run your container. This time you'll need to set some environment variables so that your application knows how to access the database. For now, you’ll do this right in the docker run
command. Later you'll see a more convenient method with Docker Compose.
メモ
Since you're running your CockroachDB cluster in insecure mode, the value for the password can be anything.
In production, don't run in insecure mode.
$ docker run -it --rm -d \
--network mynet \
--name rest-server \
-p 80:8080 \
-e PGUSER=totoro \
-e PGPASSWORD=myfriend \
-e PGHOST=db \
-e PGPORT=26257 \
-e PGDATABASE=mydb \
docker-gs-ping-roach
There are a few points to note about this command.
You map container port
8080
to host port80
this time. Thus, forGET
requests you can get away with literallycurl localhost
:$ curl localhost Hello, Docker! (0)
Or, if you prefer, a proper URL would work just as well:
$ curl http://localhost/ Hello, Docker! (0)
The total number of stored messages is
0
for now. This is fine, because you haven't posted anything to your application yet.You refer to the database container by its hostname, which is
db
. This is why you had--hostname db
when you started the database container.The actual password doesn't matter, but it must be set to something to avoid confusing the example application.
The container you've just run is named
rest-server
. These names are useful for managing the container lifecycle:# Don't do this just yet, it's only an example: $ docker container rm --force rest-server
Test the application
In the previous section, you've already tested querying your application with GET
and it returned zero for the stored message counter. Now, post some messages to it:
$ curl --request POST \
--url http://localhost/send \
--header 'content-type: application/json' \
--data '{"value": "Hello, Docker!"}'
The application responds with the contents of the message, which means it has been saved in the database:
{ "value": "Hello, Docker!" }
Send another message:
$ curl --request POST \
--url http://localhost/send \
--header 'content-type: application/json' \
--data '{"value": "Hello, Oliver!"}'
And again, you get the value of the message back:
{ "value": "Hello, Oliver!" }
Run curl and see what the message counter says:
$ curl localhost
Hello, Docker! (2)
In this example, you sent two messages and the database kept them. Or has it? Stop and remove all your containers, but not the volumes, and try again.
First, stop the containers:
$ docker container stop rest-server roach
rest-server
roach
Then, remove them:
$ docker container rm rest-server roach
rest-server
roach
Verify that they're gone:
$ docker container list --all
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
And start them again, database first:
$ docker run -d \
--name roach \
--hostname db \
--network mynet \
-p 26257:26257 \
-p 8080:8080 \
-v roach:/cockroach/cockroach-data \
cockroachdb/cockroach:latest-v20.1 start-single-node \
--insecure
And the service next:
$ docker run -it --rm -d \
--network mynet \
--name rest-server \
-p 80:8080 \
-e PGUSER=totoro \
-e PGPASSWORD=myfriend \
-e PGHOST=db \
-e PGPORT=26257 \
-e PGDATABASE=mydb \
docker-gs-ping-roach
Lastly, query your service:
$ curl localhost
Hello, Docker! (2)
Great! The count of records from the database is correct although you haven't only stopped the containers, but you've also removed them before starting new instances. The difference is in the managed volume for CockroachDB, which you reused. The new CockroachDB container has read the database files from the disk, just as it normally would if it were running outside the container.
Wind down everything
Remember, that you're running CockroachDB in insecure mode. Now that you've built and tested your application, it's time to wind everything down before moving on. You can list the containers that you are running with the list
command:
$ docker container list
Now that you know the container IDs, you can use docker container stop
and docker container rm
, as demonstrated in the previous modules.
Stop the CockroachDB and docker-gs-ping-roach
containers before moving on.
Better productivity with Docker Compose
At this point, you might be wondering if there is a way to avoid having to deal with long lists of arguments to the docker
command. The toy example you used in this series requires five environment variables to define the connection to the database. A real application might need many, many more. Then there is also a question of dependencies. Ideally, you want to make sure that the database is started before your application is run. And spinning up the database instance may require another Docker command with many options. But there is a better way to orchestrate these deployments for local development purposes.
In this section, you'll create a Docker Compose file to start your docker-gs-ping-roach
application and CockroachDB database engine with a single command.
Configure Docker Compose
In your application's directory, create a new text file named docker-compose.yml
with the following content.
version: "3.8"
services:
docker-gs-ping-roach:
depends_on:
- roach
build:
context: .
container_name: rest-server
hostname: rest-server
networks:
- mynet
ports:
- 80:8080
environment:
- PGUSER=${PGUSER:-totoro}
- PGPASSWORD=${PGPASSWORD:?database password not set}
- PGHOST=${PGHOST:-db}
- PGPORT=${PGPORT:-26257}
- PGDATABASE=${PGDATABASE:-mydb}
deploy:
restart_policy:
condition: on-failure
roach:
image: cockroachdb/cockroach:latest-v20.1
container_name: roach
hostname: db
networks:
- mynet
ports:
- 26257:26257
- 8080:8080
volumes:
- roach:/cockroach/cockroach-data
command: start-single-node --insecure
volumes:
roach:
networks:
mynet:
driver: bridge
This Docker Compose configuration is super convenient as you don't have to type all the parameters to pass to the docker run
command. You can declaratively do that in the Docker Compose file. The
Docker Compose documentation pages are quite extensive and include a full reference for the Docker Compose file format.
The .env
file
Docker Compose will automatically read environment variables from a .env
file if it's available. Since your Compose file requires PGPASSWORD
to be set, add the following content to the .env
file:
PGPASSWORD=whatever
The exact value doesn't really matter for this example, because you run CockroachDB in insecure mode. Make sure you set the variable to some value to avoid getting an error.
Merging Compose files
The file name docker-compose.yml
is the default file name which docker compose
command recognizes if no -f
flag is provided. This means you can have multiple Docker Compose files if your environment has such requirements. Furthermore, Docker Compose files are... composable (pun intended), so multiple files can be specified on the command line to merge parts of the configuration together. The following list is just a few examples of scenarios where such a feature would be very useful:
- Using a bind mount for the source code for local development but not when running the CI tests;
- Switching between using a pre-built image for the frontend for some API application vs creating a bind mount for source code;
- Adding additional services for integration testing;
- And many more...
You aren't going to cover any of these advanced use cases here.
Variable substitution in Docker Compose
One of the really cool features of Docker Compose is
variable substitution. You can see some examples in the Compose file, environment
section. By means of an example:
PGUSER=${PGUSER:-totoro}
means that inside the container, the environment variablePGUSER
shall be set to the same value as it has on the host machine where Docker Compose is run. If there is no environment variable with this name on the host machine, the variable inside the container gets the default value oftotoro
.PGPASSWORD=${PGPASSWORD:?database password not set}
means that if the environment variablePGPASSWORD
isn't set on the host, Docker Compose will display an error. This is OK, because you don't want to hard-code default values for the password. You set the password value in the.env
file, which is local to your machine. It is always a good idea to add.env
to.gitignore
to prevent the secrets being checked into the version control.
Other ways of dealing with undefined or empty values exist, as documented in the variable substitution section of the Docker documentation.
Validating Docker Compose configuration
Before you apply changes made to a Compose configuration file, there is an opportunity to validate the content of the configuration file with the following command:
$ docker compose config
When this command is run, Docker Compose reads the file docker-compose.yml
, parses it into a data structure in memory, validates where possible, and prints back the reconstruction of that configuration file from its internal representation. If this isn't possible due to errors, Docker prints an error message instead.
Build and run the application using Docker Compose
Start your application and confirm that it's running.
$ docker compose up --build
You passed the --build
flag so Docker will compile your image and then start it.
メモ
Docker Compose is a useful tool, but it has its own quirks. For example, no rebuild is triggered on the update to the source code unless the
--build
flag is provided. It is a very common pitfall to edit one's source code, and forget to use the--build
flag when runningdocker compose up
.
Since your set-up is now run by Docker Compose, it has assigned it a project name, so you get a new volume for your CockroachDB instance. This means that your application will fail to connect to the database, because the database doesn't exist in this new volume. The terminal displays an authentication error for the database:
# ... omitted output ...
rest-server | 2021/05/10 00:54:25 failed to initialise the store: pq: password authentication failed for user totoro
roach | *
roach | * INFO: Replication was disabled for this cluster.
roach | * When/if adding nodes in the future, update zone configurations to increase the replication factor.
roach | *
roach | CockroachDB node starting at 2021-05-10 00:54:26.398177 +0000 UTC (took 3.0s)
roach | build: CCL v20.1.15 @ 2021/04/26 16:11:58 (go1.13.9)
roach | webui: http://db:8080
roach | sql: postgresql://root@db:26257?sslmode=disable
roach | RPC client flags: /cockroach/cockroach <client cmd> --host=db:26257 --insecure
roach | logs: /cockroach/cockroach-data/logs
roach | temp dir: /cockroach/cockroach-data/cockroach-temp349434348
roach | external I/O path: /cockroach/cockroach-data/extern
roach | store[0]: path=/cockroach/cockroach-data
roach | storage engine: rocksdb
roach | status: initialized new cluster
roach | clusterID: b7b1cb93-558f-4058-b77e-8a4ddb329a88
roach | nodeID: 1
rest-server exited with code 0
rest-server | 2021/05/10 00:54:25 failed to initialise the store: pq: password authentication failed for user totoro
rest-server | 2021/05/10 00:54:26 failed to initialise the store: pq: password authentication failed for user totoro
rest-server | 2021/05/10 00:54:29 failed to initialise the store: pq: password authentication failed for user totoro
rest-server | 2021/05/10 00:54:25 failed to initialise the store: pq: password authentication failed for user totoro
rest-server | 2021/05/10 00:54:26 failed to initialise the store: pq: password authentication failed for user totoro
rest-server | 2021/05/10 00:54:29 failed to initialise the store: pq: password authentication failed for user totoro
rest-server exited with code 1
# ... omitted output ...
Because of the way you set up your deployment using restart_policy
, the failing container is being restarted every 20 seconds. So, in order to fix the problem, you need to log in to the database engine and create the user. You've done it before in
Configure the database engine.
This isn't a big deal. All you have to do is to connect to CockroachDB instance and run the three SQL commands to create the database and the user, as described in Configure the database engine.
So, log in to the database engine from another terminal:
$ docker exec -it roach ./cockroach sql --insecure
And run the same commands as before to create the database mydb
, the user totoro
, and to grant that user necessary permissions. Once you do that (and the example application container is automatically restarts), the rest-service
stops failing and restarting and the console goes quiet.
It would have been possible to connect the volume that you had previously used, but for the purposes of this example it's more trouble than it's worth and it also provided an opportunity to show how to introduce resilience into your deployment via the restart_policy
Compose file feature.
Testing the application
Now, test your API endpoint. In the new terminal, run the following command:
$ curl http://localhost/
You should receive the following response:
Hello, Docker! (0)
Shutting down
To stop the containers started by Docker Compose, press ctrl+c
in the terminal where you ran docker compose up
. To remove those containers after they've been stopped, run docker compose down
.
Detached mode
You can run containers started by the docker compose
command in detached mode, just as you would with the docker
command, by using the -d
flag.
To start the stack, defined by the Compose file in detached mode, run:
$ docker compose up --build -d
Then, you can use docker compose stop
to stop the containers and docker compose down
to remove them.
Further exploration
You can run docker compose
to see what other commands are available.
Wrap up
There are some tangential, yet interesting points that were purposefully not covered in this chapter. For the more adventurous reader, this section offers some pointers for further study.
Persistent storage
A managed volume isn't the only way to provide your container with persistent storage. It is highly recommended to get acquainted with available storage options and their use cases, covered in Manage data in Docker.
CockroachDB clusters
You ran a single instance of CockroachDB, which was enough for this example. But, it's possible to run a CockroachDB cluster, which is made of multiple instances of CockroachDB, each instance running in its own container. Since CockroachDB engine is distributed by design, it would have taken surprisingly little change to your procedure to run a cluster with multiple nodes.
Such distributed set-up offers interesting possibilities, such as applying Chaos Engineering techniques to simulate parts of the cluster failing and evaluating your application's ability to cope with such failures.
If you are interested in experimenting with CockroachDB clusters, check out:
- Start a CockroachDB Cluster in Docker article; and
- Documentation for Docker Compose keywords
deploy
andreplicas
.
Other databases
Since you didn't run a cluster of CockroachDB instances, you might be wondering whether you could have used a non-distributed database engine. The answer is 'yes', and if you were to pick a more traditional SQL database, such as PostgreSQL, the process described in this chapter would have been very similar.
Next steps
In this module, you set up a containerized development environment with your application and the database engine running in different containers. You also wrote a Docker Compose file which links the two containers together and provides for easy starting up and tearing down of the development environment.
In the next module, you'll take a look at one possible approach to running functional tests in Docker.