Docker Compose リリースノート

読む時間の目安: 84 分

1.29.2

(2021-05-10)

その他

• upコマンド内においてdocker compose利用を促す説明を削除しました。

• requirements-indirect.txt内のpyを1.10.0に。

1.29.1

(2021-04-13)

バグ

• Windows ビルドにおいて誤ったハンドラー警告を修正しました。

• IPC モードの更新時に config ハッシュがコンテナー再生成を引き起こしてしまう問題を修正しました。

• placement.max_replicas_per_nodeに対する変換マップを修正しました。

• ビルド時の余計なスキャン提案を削除しました。

1.29.0

(2021-04-06)

機能

• docker-compose configに profile フィルターを追加しました。

• depends_on条件を追加し、サービスの正常完了を待つようにしました。

その他

• ビルド時にイメージスキャンに関するメッセージを追加しました。

• 警告メッセージ--no-ansiにおいて、選択肢として--ansi neverがあることを示すようにしました。

• docker-py を 5.0.0 に。

• PyYAML を 5.4.1 に。

• python-dotenv を 0.17.0 に。

1.28.6

(2021-03-23)

バグフィックス

• --env-fileをカレントのワーキングディレクトリからの相対パスにしました。 --env-fileによって指定される環境ファイルパスは、カレントなワーキングディレクトリからの相対パスとなり、プロジェクトディレクトリにあるデフォルトの.envファイルをオーバーライドするようになります。

• Compose スキーマのアップデートにより、不足していたサービスプロパティstorage_optを修正しました。

• extra_hostsの一覧書式を修正しました。

• execにおける余計なエラーメッセージを削除しました。

その他

• デフォルトのファイル名リストにcompose.ymlとcompose.yamlを追加しました。

1.28.5

(2021-02-26)

バグ

• SSH クライアントの起動時における OpenSSL バージョンの不一致によるエラーを修正しました。 （docker-py 4.4.4 経由による実行によりこの修正が有効になります。）

• ネイティブビルダーに含まれていなかったビルドフラグplatform、isolation、extra_hostsを追加しました。

• ネイティブビルドにおける情報メッセージを削除しました。

• サービスログドライバーがnoneに設定されているときのログ取得バグを修正しました。

1.28.4

(2021-02-18)

バグフィックス

• docker-py を 4.4.3 にアップデートすることで、SSH ポート解析処理を修正しました。

その他

• Python を 3.7.10 に。

1.28.3

(2021-02-17)

バグフィックス

• SSH ホスト名が ‘s’ や ‘h’ で始まる場合の解析処理を修正しました。 またエラー発生を隠蔽してしまうため quiet オプションを（docker-py の 4.4.2 へのアップデートを通じて）取り除きました。

• --no-log-prefixオプションにおけるキーエラーを修正しました。

• サービスプロファイルに対する CLI 環境変数名の誤りを修正しました。 COMPOSE_PROFILEではなくCOMPOSE_PROFILES。

• fish 補完を修正しました。

その他

• cryptography を 3.3.2 に。

• ログドライバーフィルターを削除しました。

本リリースにおいて修正された PR や issue の一覧は Compose 1.28.3 を参照してください。

1.28.2

(2021-01-26)

バグフィックス

• Linux のスタティックビルドのために Python 3.7 に戻しました。

• docker-compose logs|up --no-log-prefixに対して bash 補完を追加しました。

その他

• CI のセットアップを更新しました。

1.28.0

(2021-01-20)

機能

• デバイス要求を通じた NVIDIA GPU への対応を追加しました。

• サービスプロファイルへのサポートを追加しました。

• Docker CLI における SSH 接続方式を、ローカルの SSH クライアント処理とするように変更しました。 環境変数COMPOSE_PARAMIKO_SSH=1を設定すれば、従来の挙動に戻すことができます。

• ログプレフィックスを無効にするフラグを追加しました。

• ANSI 出力制御のためのフラグを追加しました。

• Docker Compose ではイメージビルド時に、ネイティブな Docker CLIbuildコマンドを用いるようにしました。 この機能は環境変数COMPOSE_DOCKER_CLI_BUILD=0の設定により無効化できます。

バグフィックス

• デフォルトでparallel_pull=Trueとしました。

• 非 Swarm モードにおける config に対する警告メッセージを元に戻しました。

• project_dirの定義時には--fileを考慮するようにしました。

• compose upにおいてサービスをアタッチする際のバグを修正しました。

その他

• 使用状況のメトリックスを追加しました。

• COMPOSE 仕様でのスキーマを揃えました。

• 必須の環境変数が指定されていない場合のエラーメッセージを改善しました。

• attrsを 20.3.0 に。

• more_itertoolsを 8.6.0 に。

• cryptograhy to 3.2.1 に。

• cffiを 1.14.4 に。

• virtualenvを 20.2.2 に。

• bcryptを 3.2.0 に。

• GitPython を 3.1.11 に。

• docker-pyを 4.4.1 に。

• Python を 3.9 に。

• Linux: Debian のベースイメージを buster に。（Python 3.9 が必要）

• macOS: OpenSSL 1.1.1g を 1.1.1h に。Python 3.7.7 を 3.9.0 に。

• PyInstaller を 4.1 に。

• ベースイメージに対する制限を、最新のマイナーバージョンにまで緩和しました。

• README を更新しました。

1.27.4

(2020-09-24)

バグフィックス

• バインドマウントにおけるパス確認を削除しました。

• v1 でない場合のポート出力を長い書式に修正しました。

• Docker ソケットアドレスにプロトコルを追加しました。

1.27.3

(2020-09-16)

バグフィックス

• docker-compose configにmax_replicas_per_nodeをマージしました。

• docker-compose configにおけるdepends_onのシリアライズ処理を修正しました。

• docker-compose upにおいて動作していないコンテナーがある際のスケール処理を修正しました。

• localドライバー利用時のdriver_opts.deviceにおいて相対パスを可能にしました。

• cpusに対して文字列指定を可能にしました。

1.27.2

(2020-09-10)

バグフィックス

• docker-compose run によるコンテナーアタッチのバグを修正しました。

1.27.1

(2020-09-10)

バグフィックス

• service.scale 指定時の docker-compose run コマンドを修正しました。

• Swarm ネットワーク通信における障害への一時対応として、driver プロパティを外部ネットワークに対して機能させるようにしました。

• 内部スキーマバージョン 3.9 をデフォルトにしました。

• Compose ファイル内に設定されたバージョン番号を保持するようにしました。

1.27.0

(2020-09-07)

機能

• Compose フォーマット 2.x と 3.x をマージし、COMPOSE_SPECスキーマに合わせました。

• ipcに対応するサービスモードを導入しました。

• コンテナーモードにおいて環境変数COMPOSE_PROJECT_NAMEを設定しました。

• run の動作を up と同様にしました。

• 環境変数COMPOSE_DOCKER_CLI_BUILDの設定時にはdocker-compose runにおいてdocker buildを利用するようにしました。

• Engine のクエリー（auto）に対して docker-py のデフォルト API バージョンを利用するようにしました。

• ビルド時に network_mode を取得するようにしました。

バグフィックス

• ビルドが必要ではない場合には、ビルドコンテキストのパス確認を無視するようにしました。

• docker-py 4.3.1 へのアップグレードにともなって、float から byte への変換を修正しました。

• デプロイの項が設定されているときのスケールに関するバグを修正しました。

• setup.pyにおいてdocker-pyのバージョンアップに対応しました。

• 試験的ビルドに失敗検出を修正しました。

• Docker CLI へのコンテキスト送信を修正しました。

その他

• docker-py 4.3.1 へのアップデート。

• tox 3.19.0 へのアップデート。

• virtualenv 20.0.30 へのアップデート。

• Docs 同期に対するスクリプトを追加しました。

1.26.2

(2020-07-02)

バグフィックス

• Enforced docker-py 4.2.2 as minimum version when installing with pip.

1.26.1

(2020-06-30)

機能

• Bumped docker-py from 4.2.1 to 4.2.2.

バグフィックス

• Enforced docker-py 4.2.1 as minimum version when installing with pip.

• Fixed context load for non-docker endpoints.

1.26.0

(2020-06-03)

機能

• docker context サポートの追加。

• Added missing test dependency ddt to setup.py.

• Added --attach-dependencies to command up for attaching to dependencies.

• Allowed compatibility option with COMPOSE_COMPATIBILITY environment variable.

• Bumped Pytest to 5.3.4 and add refactor compatibility with the new version.

• Bumped OpenSSL from 1.1.1f to 1.1.1g.

• Bumped certifi from 2019.11.28 to 2020.4.5.1.

• Bumped docker-py from 4.2.0 to 4.2.1.

バグフィックス

• Properly escaped values coming from env_files.

• Synchronized compose-schemas with upstream (docker/cli).

• Removed None entries on exec command.

• Added distro package to get distro information.

• Added python-dotenv to delegate .env file processing.

• Stopped adjusting output on terminal width when piped into another command.

• Showed an error message when version attribute is malformed.

• Fixed HTTPS connection when DOCKER_HOST is remote.

1.25.5

(2020-04-10)

機能

• Bumped OpenSSL from 1.1.1d to 1.1.1f.

• Added Compose version 3.8.

  • Limited service scale to the size specified by the field deploy.placement.max_replicas_per_node.

1.25.4

(2020-02-03)

バグフィックス

• Fixed the CI script to enforce the minimal MacOS version to 10.11.

• Fixed docker-compose exec for keys with no value on environment files.

1.25.3

(2020-01-23)

バグフィックス

• Fixed the CI script to enforce the compilation with Python3.

• Updated the binary’s sha256 on the release page.

1.25.2

(2020-01-20)

新規機能

• Docker Compose now allows the compatibility option with COMPOSE_COMPATIBILITY environment variable.

バグフィックス

• Fixed an issue that caused Docker Compose to crash when the version field was set to an invalid value. Docker Compose now displays an error message when invalid values are used in the version field.

• Fixed an issue that caused Docker Compose to render messages incorrectly when running commands outside a terminal.

1.25.1

(2020-01-06)

バグフィックス

• Decoded the APIError explanation to Unicode before using it to create and start a container.

• Docker Compose discards com.docker.compose.filepaths labels that have None as value. This usually occurs when labels originate from stdin.

• Added OS X binary as a directory to solve slow start up time issues caused by macOS Catalina binary scan.

• Passed the HOME environment variable in container mode when running with script/run/run.sh.

• Docker Compose now reports images that cannot be pulled, however, are required to be built.

1.25.0

(2019-11-18)

新規機能

• Set no-colors to true by changing CLICOLOR env variable to 0.

• Added working directory, config files, and env file to service labels.

• Added ARM build dependencies.

• Added BuildKit support (use DOCKER_BUILDKIT=1 and COMPOSE_DOCKER_CLI_BUILD=1).

• Raised Paramiko to version 2.6.0.

• Added the following tags: docker-compose:latest, docker-compose:<version>-alpine, and docker-compose:<version>-debian.

• Raised docker-py to version 4.1.0.

• Enhanced support for requests, up to version 2.22.0.

• Removed empty tag on build:cache_from.

• Dockerfile enhancement that provides for the generation of libmusl binaries for Alpine Linux.

• Pulling only of images that cannot be built.

• The scale attribute now accepts 0 as a value.

• Added a --quiet option and a --no-rm option to the docker-compose build command.

• Added a --no-interpolate option to the docker-compose config command.

• Raised OpenSSL for MacOS build from 1.1.0 to 1.1.1c.

• Added support for the docker-compose.yml file’s credential_spec configuration option.

• Resolution of digests without having to pull the image.

• Upgraded pyyaml to version 4.2b1.

• Lowered the severity to warning for instances in which down attempts to remove a non-existent image.

• Mandated the use of improved API fields for project events, when possible.

• Updated setup.py for modern pypi/setuptools, and removed pandoc dependencies.

• Removed Dockerfile.armhf, which is no longer required.

バグフィックス

• Made container service color deterministic, including the removal of the color red.

• Fixed non-ASCII character errors (Python 2 only).

• Changed image sizing to decimal format, to align with Docker CLI.

• tty size acquired through Python POSIX support.

• Fixed same file extends optimization.

• Fixed stdin_open.

• Fixed the issue of --remove-orphans being ignored encountered during use with up --no-start option.

• Fixed docker-compose ps --all command.

• Fixed the depends_on dependency recreation behavior.

• Fixed bash completion for the docker-compose build --memory command.

• Fixed the misleading environmental variables warning that occurs when the docker-compose exec command is performed.

• Fixed the failure check in the parallel_execute_watch function.

• Fixed the race condition that occurs following the pulling of an image.

• Fixed error on duplicate mount points (a configuration error message now displays).

• Fixed the merge on networks section.

• Compose container is always connected to stdin by default.

• Fixed the presentation of failed services on the docker-compose start command when containers are not available.

1.24.1

(2019-06-24)

This release contains minor improvements and bug fixes.

1.24.0

(2019-03-28)

機能

• Added support for connecting to the Docker Engine using the ssh protocol.

• Added an --all flag to docker-compose ps to include stopped one-off containers in the command’s output.

• Added bash completion for ps --all|-a.

• Added support for credential_spec.

• Added --parallel to docker build’s options in bash and zsh completion.

バグフィックス

• Fixed a bug where some valid credential helpers weren’t properly handled by Compose when attempting to pull images from private registries.

• Fixed an issue where the output of docker-compose start before containers were created was misleading.

• Compose will no longer accept whitespace in variable names sourced from environment files. This matches the Docker CLI behavior.

• Compose will now report a configuration error if a service attempts to declare duplicate mount points in the volumes section.

• Fixed an issue with the containerized version of Compose that prevented users from writing to stdin during interactive sessions started by run or exec.

• One-off containers started by run no longer adopt the restart policy of the service, and are instead set to never restart.

• Fixed an issue that caused some container events to not appear in the output of the docker-compose events command.

• Missing images will no longer stop the execution of docker-compose down commands. A warning is now displayed instead.

• Force virtualenv version for macOS CI.

• Fixed merging of Compose files when network has None config.

• Fixed CTRL+C issues by enabling bootloader_ignore_signals in pyinstaller.

• Bumped docker-py version to 3.7.2 to fix SSH and proxy configuration issues.

• Fixed release script and some typos on release documentation.

1.23.2

(2018-11-28)

バグフィックス

• Reverted a 1.23.0 change that appended random strings to container names created by docker-compose up, causing addressability issues.

  Note: Containers created by docker-compose run will continue to use randomly generated names to avoid collisions during parallel runs.

• Fixed an issue where some dockerfile paths would fail unexpectedly when attempting to build on Windows.

• Fixed a bug where build context URLs would fail to build on Windows.

• Fixed a bug that caused run and exec commands to fail for some otherwise accepted values of the --host parameter.

• Fixed an issue where overrides for the storage_opt and isolation keys in service definitions weren’t properly applied.

• Fixed a bug where some invalid Compose files would raise an uncaught exception during validation.

1.23.1

(2018-11-01)

バグフィックス

• Fixed a bug where working with containers created with a version of Compose earlier than 1.23.0 would cause unexpected crashes.

• Fixed an issue where the behavior of the --project-directory flag would vary depending on which subcommand was used.

1.23.0

(2018-10-30)

Important note

The default naming scheme for containers created by Compose in this version has changed from <project>_<service>_<index> to <project>_<service>_<index>_<slug>, where <slug> is a randomly-generated hexadecimal string. Please make sure to update scripts relying on the old naming scheme accordingly before upgrading.

機能

• Logs for containers restarting after a crash will now appear in the output of the up and logs commands.

• Added --hash option to the docker-compose config command, allowing users to print a hash string for each service’s configuration to facilitate rolling updates.

• Added --parallel flag to the docker-compose build command, allowing Compose to build up to 5 images simultaneously.

• Output for the pull command now reports status / progress even when pulling multiple images in parallel.

• For images with multiple names, Compose will now attempt to match the one present in the service configuration in the output of the images command.

バグフィックス

• Fixed an issue where parallel run commands for the same service would fail due to name collisions.

• Fixed an issue where paths longer than 260 characters on Windows clients would cause docker-compose build to fail.

• Fixed a bug where attempting to mount /var/run/docker.sock with Docker Desktop for Windows would result in failure.

• The --project-directory option is now used by Compose to determine where to look for the .env file.

• docker-compose build no longer fails when attempting to pull an image with credentials provided by the gcloud credential helper.

• Fixed the --exit-code-from option in docker-compose up to always report the actual exit code even when the watched container is not the cause of the exit.

• Fixed an issue that would prevent recreating a service in some cases where a volume would be mapped to the same mountpoint as a volume declared within the Dockerfile for that image.

• Fixed a bug that caused hash configuration with multiple networks to be inconsistent, causing some services to be unnecessarily restarted.

• Fixed a bug that would cause failures with variable substitution for services with a name containing one or more dot characters.

• Fixed a pipe handling issue when using the containerized version of Compose.

• Fixed a bug causing external: false entries in the Compose file to be printed as external: true in the output of docker-compose config.

• Fixed a bug where issuing a docker-compose pull command on services without a defined image key would cause Compose to crash.

• Volumes and binds are now mounted in the order they are declared in the service definition.

その他

• The zsh completion script has been updated with new options, and no longer suggests container names where service names are expected.

1.22.0

(2018-07-17)

新規機能

Compose format version 3.7

• Introduced version 3.7 of the docker-compose.yml specification. This version requires Docker Engine 18.06.0 or above.

• Added support for rollback_config in the deploy configuration

• Added support for the init parameter in service configurations

• Added support for extension fields in service, network, volume, secret, and config configurations

Compose format version 2.4

• Added support for extension fields in service, network, and volume configurations

バグフィックス

• Fixed a bug that prevented deployment with some Compose files when DOCKER_DEFAULT_PLATFORM was set

• Compose will no longer try to create containers or volumes with invalid starting characters

• Fixed several bugs that prevented Compose commands from working properly with containers created with an older version of Compose

• Fixed an issue with the output of docker-compose config with the --compatibility-mode flag enabled when the source file contains attachable networks

• Fixed a bug that prevented the gcloud credential store from working properly when used with the Compose binary on UNIX

• Fixed a bug that caused connection errors when trying to operate over a non-HTTPS TCP connection on Windows

• Fixed a bug that caused builds to fail on Windows if the Dockerfile was located in a subdirectory of the build context

• Fixed an issue that prevented proper parsing of UTF-8 BOM encoded Compose files on Windows

• Fixed an issue with handling of the double-wildcard (**) pattern in .dockerignore files when using docker-compose build

• Fixed a bug that caused auth values in legacy .dockercfg files to be ignored
• docker-compose build will no longer attempt to create image names starting with an invalid character

1.21.2

(2018-05-03)

バグフィックス

• Fixed a bug where the ip_range attribute in IPAM configs was prevented from passing validation

1.21.1

(2018-04-27)

バグフィックス

• In 1.21.0, we introduced a change to how project names are sanitized for internal use in resource names. This caused issues when manipulating an existing, deployed application whose name had changed as a result. This release properly detects resources using “legacy” naming conventions.

• Fixed an issue where specifying an in-context Dockerfile using an absolute path would fail despite being valid.

• Fixed a bug where IPAM option changes were incorrectly detected, preventing redeployments.

• Validation of v2 files now properly checks the structure of IPAM configs.

• Improved support for credentials stores on Windows to include binaries using extensions other than .exe. The list of valid extensions is determined by the contents of the PATHEXT environment variable.

• Fixed a bug where Compose would generate invalid binds containing duplicate elements with some v3.2 files, triggering errors at the Engine level during deployment.

1.21.0

(2018-04-11)

新規機能

Compose file version 2.4

• Introduced version 2.4 of the docker-compose.yml specification. This version requires Docker Engine 17.12.0 or above.

• Added support for the platform parameter in service definitions. If supplied, the parameter is also used when performing build for the service.

Compose file version 2.2 and up

• Added support for the cpu_rt_period and cpu_rt_runtime parameters in service definitions (2.x only).

Compose file version 2.1 and up

• Added support for the cpu_period parameter in service definitions (2.x only).

• Added support for the isolation parameter in service build configurations. Additionally, the isolation parameter in service definitions is used for builds as well if no build.isolation parameter is defined. (2.x only)

All formats

• Added support for the --workdir flag in docker-compose exec.

• Added support for the --compress flag in docker-compose build.

• docker-compose pull is now performed in parallel by default. You can opt out using the --no-parallel flag. The --parallel flag is now deprecated and will be removed in a future version.

• Dashes and underscores in project names are no longer stripped out.

• docker-compose build now supports the use of Dockerfile from outside the build context.

バグフィックス

• Compose now checks that the volume’s configuration matches the remote volume, and errors out if a mismatch is detected.

• Fixed a bug that caused Compose to raise unexpected errors when attempting to create several one-off containers in parallel.

• Fixed a bug with argument parsing when using docker-machine config to generate TLS flags for exec and run commands.

• Fixed a bug where variable substitution with an empty default value (e.g. ${VAR:-}) would print an incorrect warning.

• Improved resilience when encoding of the Compose file doesn’t match the system’s. Users are encouraged to use UTF-8 when possible.

• Fixed a bug where external overlay networks in Swarm would be incorrectly recognized as inexistent by Compose, interrupting otherwise valid operations.

1.20.0

(2018-03-20)

新規機能

Compose file version 3.6

• Introduced version 3.6 of the docker-compose.yml specification. This version must be used with Docker Engine 18.02.0 or above.

• Added support for the tmpfs.size property in volume mappings

Compose file version 3.2 and up

• The --build-arg option can now be used without specifying a service in docker-compose build

Compose file version 2.3

• Added support for device_cgroup_rules in service definitions

• Added support for the tmpfs.size property in long-form volume mappings

• The --build-arg option can now be used without specifying a service in docker-compose build

All formats

• Added a --log-level option to the top-level docker-compose command. Accepted values are debug, info, warning, error, critical. Default log level is info

• docker-compose run now allows users to unset the container’s entrypoint

• Proxy configuration found in the ~/.docker/config.json file now populates environment and build args for containers created by Compose

• Added the --use-aliases flag to docker-compose run, indicating that network aliases declared in the service’s config should be used for the running container

• Added the --include-deps flag to docker-compose pull

• docker-compose run now kills and removes the running container upon receiving SIGHUP

• docker-compose ps now shows the containers’ health status if available

• Added the long-form --detach option to the exec, run and up commands

バグフィックス

• Fixed .dockerignore handling, notably with regard to absolute paths and last-line precedence rules

• Fixed an issue where Compose would make costly DNS lookups when connecting to the Engine when using Docker For Mac

• Fixed a bug introduced in 1.19.0 which caused the default certificate path to not be honored by Compose

• Fixed a bug where Compose would incorrectly check whether a symlink’s destination was accessible when part of a build context

• Fixed a bug where .dockerignore files containing lines of whitespace caused Compose to error out on Windows

• Fixed a bug where --tls* and --host options wouldn’t be properly honored for interactive run and exec commands

• A seccomp:<filepath> entry in the security_opt config now correctly sends the contents of the file to the engine

• ANSI output for up and down operations should no longer affect the wrong lines

• Improved support for non-unicode locales

• Fixed a crash occurring on Windows when the user’s home directory name contained non-ASCII characters

• Fixed a bug occurring during builds caused by files with a negative mtime values in the build context

• Fixed an encoding bug when streaming build progress

1.19.0

(2018-02-07)

Breaking changes

• On UNIX platforms, interactive run and exec commands now require the docker CLI to be installed on the client by default. To revert to the previous behavior, users may set the COMPOSE_INTERACTIVE_NO_CLI environment variable.

新規機能

Compose file version 3.x

• The output of the config command should now merge deploy options from several Compose files in a more accurate manner

Compose file version 2.3

• Added support for the runtime option in service definitions

Compose file version 2.1 and up

• Added support for the ${VAR:?err} and ${VAR?err} variable interpolation syntax to indicate mandatory variables

Compose file version 2.x

• Added priority key to service network mappings, allowing the user to define in which order the specified service will connect to each network

All formats

• Added --renew-anon-volumes (shorthand -V) to the up command, preventing Compose from recovering volume data from previous containers for anonymous volumes

• Added limit for number of simultaneous parallel operations, which should prevent accidental resource exhaustion of the server. Default is 64 and can be configured using the COMPOSE_PARALLEL_LIMIT environment variable

• Added --always-recreate-deps flag to the up command to force recreating dependent services along with the dependency owner

• Added COMPOSE_IGNORE_ORPHANS environment variable to forgo orphan container detection and suppress warnings

• Added COMPOSE_FORCE_WINDOWS_HOST environment variable to force Compose to parse volume definitions as if the Docker host was a Windows system, even if Compose itself is currently running on UNIX

• Bash completion should now be able to better differentiate between running, stopped and paused services

バグフィックス

• Fixed a bug that would cause the build command to report a connection error when the build context contained unreadable files or FIFO objects. These file types will now be handled appropriately

• Fixed various issues around interactive run/exec sessions.

• Fixed a bug where setting TLS options with environment and CLI flags simultaneously would result in part of the configuration being ignored

• Fixed a bug where the DOCKER_TLS_VERIFY environment variable was being ignored by Compose

• Fixed a bug where the -d and --timeout flags in up were erroneously marked as incompatible

• Fixed a bug where the recreation of a service would break if the image associated with the previous container had been removed

• Fixed a bug where updating a mount’s target would break Compose when trying to recreate the associated service

• Fixed a bug where tmpfs volumes declared using the extended syntax in Compose files using version 3.2 would be erroneously created as anonymous volumes instead

• Fixed a bug where type conversion errors would print a stacktrace instead of exiting gracefully

• Fixed some errors related to unicode handling

• Dependent services no longer get recreated along with the dependency owner if their configuration hasn’t changed

• Added better validation of labels fields in Compose files. Label values containing scalar types (number, boolean) now get automatically converted to strings

1.18.0

(2017-12-18)

新規機能

Compose file version 3.5

• Introduced version 3.5 of the docker-compose.yml specification. This version requires Docker Engine 17.06.0 or above

• Added support for the shm_size parameter in build configurations

• Added support for the isolation parameter in service definitions

• Added support for custom names for network, secret and config definitions

Compose file version 2.3

• Added support for extra_hosts in build configuration

• Added support for the long syntax for volume entries, as previously introduced in the 3.2 format. Using this syntax will create mounts instead of volumes.

Compose file version 2.1 and up

• Added support for the oom_kill_disable parameter in service definitions (2.x only)

• Added support for custom names for network definitions (2.x only)

All formats

• Values interpolated from the environment will now be converted to the proper type when used in non-string fields.

• Added support for --label in docker-compose run

• Added support for --timeout in docker-compose down

• Added support for --memory in docker-compose build

• Setting stop_grace_period in service definitions now also sets the container’s stop_timeout

バグフィックス

• Fixed an issue where Compose was still handling service hostname according to legacy engine behavior, causing hostnames containing dots to be cut up

• Fixed a bug where the X-Y:Z syntax for ports was considered invalid by Compose

• Fixed an issue with CLI logging causing duplicate messages and inelegant output to occur

• Fixed an issue that caused stop_grace_period to be ignored when using multiple Compose files

• Fixed a bug that caused docker-compose images to crash when using untagged images

• Fixed a bug where the valid ${VAR:-} syntax would cause Compose to error out

• Fixed a bug where env_file entries using an UTF-8 BOM were being read incorrectly

• Fixed a bug where missing secret files would generate an empty directory in their place

• Fixed character encoding issues in the CLI’s error handlers

• Added validation for the test field in healthchecks

• Added validation for the subnet field in IPAM configurations

• Added validation for volumes properties when using the long syntax in service definitions

• The CLI now explicit prevents using -d and --timeout together in docker-compose up

1.17.0

(2017-11-01)

新規機能

Compose file version 3.4

• Introduced version 3.4 of the docker-compose.yml specification. This version requires to be used with Docker Engine 17.06.0 or above.

• Added support for cache_from, network and target options in build configurations

• Added support for the order parameter in the update_config section

• Added support for setting a custom name in volume definitions using the name parameter

Compose file version 2.3

• Added support for shm_size option in build configuration

Compose file version 2.x

• Added support for extension fields (x-*). Also available for v3.4 files

All formats

• Added new --no-start to the up command, allowing users to create all resources (networks, volumes, containers) without starting services. The create command is deprecated in favor of this new option

バグフィックス

• Fixed a bug where extra_hosts values would be overridden by extension files instead of merging together

• Fixed a bug where the validation for v3.2 files would prevent using the consistency field in service volume definitions

• Fixed a bug that would cause a crash when configuration fields expecting unique items would contain duplicates

• Fixed a bug where mount overrides with a different mode would create a duplicate entry instead of overriding the original entry

• Fixed a bug where build labels declared as a list wouldn’t be properly parsed

• Fixed a bug where the output of docker-compose config would be invalid for some versions if the file contained custom-named external volumes

• Improved error handling when issuing a build command on Windows using an unsupported file version

• Fixed an issue where networks with identical names would sometimes be created when running up commands concurrently.

1.16.0

(2017-08-31)

新規機能

Compose file version 2.3

• Introduced version 2.3 of the docker-compose.yml specification. This version requires to be used with Docker Engine 17.06.0 or above.

• Added support for the target parameter in build configurations

• Added support for the start_period parameter in healthcheck configurations

Compose file version 2.x

• Added support for the blkio_config parameter in service definitions

• Added support for setting a custom name in volume definitions using the name parameter (not available for version 2.0)

All formats

• Added new CLI flag --no-ansi to suppress ANSI control characters in output

バグフィックス

• Fixed a bug where nested extends instructions weren’t resolved properly, causing “file not found” errors

• Fixed several issues with .dockerignore parsing

• Fixed issues where logs of TTY-enabled services were being printed incorrectly and causing MemoryError exceptions

• Fixed a bug where printing application logs would sometimes be interrupted by a UnicodeEncodeError exception on Python 3

• The $ character in the output of docker-compose config is now properly escaped

• Fixed a bug where running docker-compose top would sometimes fail with an uncaught exception

• Fixed a bug where docker-compose pull with the --parallel flag would return a 0 exit code when failing

• Fixed an issue where keys in deploy.resources were not being validated

• Fixed an issue where the logging options in the output of docker-compose config would be set to null, an invalid value

• Fixed the output of the docker-compose images command when an image would come from a private repository using an explicit port number

• Fixed the output of docker-compose config when a port definition used 0 as the value for the published port

1.15.0

(2017-07-26)

新規機能

Compose file version 2.2

• Added support for the network parameter in build configurations.

Compose file version 2.1 and up

• The pid option in a service’s definition now supports a service:<name> value.

• Added support for the storage_opt parameter in in service definitions. This option is not available for the v3 format

All formats

• Added --quiet flag to docker-compose pull, suppressing progress output

• Some improvements to CLI output

バグフィックス

• Volumes specified through the --volume flag of docker-compose run now complement volumes declared in the service’s definition instead of replacing them

• Fixed a bug where using multiple Compose files would unset the scale value defined inside the Compose file.

• Fixed an issue where the credHelpers entries in the config.json file were not being honored by Compose

• Fixed a bug where using multiple Compose files with port declarations would cause failures in Python 3 environments

• Fixed a bug where some proxy-related options present in the user’s environment would prevent Compose from running

• Fixed an issue where the output of docker-compose config would be invalid if the original file used Y or N values

• Fixed an issue preventing up operations on a previously created stack on Windows Engine.

1.14.0

(2017-06-19)

新規機能

Compose file version 3.3

• Introduced version 3.3 of the docker-compose.yml specification. This version requires to be used with Docker Engine 17.06.0 or above. Note: the credential_spec and configs keys only apply to Swarm services and will be ignored by Compose

Compose file version 2.2

• Added the following parameters in service definitions: cpu_count, cpu_percent, cpus

Compose file version 2.1

• Added support for build labels. This feature is also available in the 2.2 and 3.3 formats.

All formats

• Added shorthand -u for --user flag in docker-compose exec

• Differences in labels between the Compose file and remote network will now print a warning instead of preventing redeployment.

バグフィックス

• Fixed a bug where service’s dependencies were being rescaled to their default scale when running a docker-compose run command

• Fixed a bug where docker-compose rm with the --stop flag was not behaving properly when provided with a list of services to remove

• Fixed a bug where cache_from in the build section would be ignored when using more than one Compose file.

• Fixed a bug that prevented binding the same port to different IPs when using more than one Compose file.

• Fixed a bug where override files would not be picked up by Compose if they had the .yaml extension

• Fixed a bug on Windows Engine where networks would be incorrectly flagged for recreation

• Fixed a bug where services declaring ports would cause crashes on some versions of Python 3

• Fixed a bug where the output of docker-compose config would sometimes contain invalid port definitions

1.13.0

(2017-05-02)

Breaking changes

• docker-compose up now resets a service’s scaling to its default value. You can use the newly introduced --scale option to specify a custom scale value

新規機能

Compose file version 2.2

• Introduced version 2.2 of the docker-compose.yml specification. This version requires to be used with Docker Engine 1.13.0 or above

• Added support for init in service definitions.

• Added support for scale in service definitions. The configuration’s value can be overridden using the --scale flag in docker-compose up. The scale command is disabled for this file format

Compose file version 2.x

• Added support for options in the ipam section of network definitions

バグフィックス

• Fixed a bug where paths provided to compose via the -f option were not being resolved properly

• Fixed a bug where the ext_ip::target_port notation in the ports section was incorrectly marked as invalid

• Fixed an issue where the exec command would sometimes not return control to the terminal when using the -d flag

• Fixed a bug where secrets were missing from the output of the config command for v3.2 files

• Fixed an issue where docker-compose would hang if no internet connection was available

• Fixed an issue where paths containing unicode characters passed via the -f flag were causing Compose to crash

• Fixed an issue where the output of docker-compose config would be invalid if the Compose file contained external secrets

• Fixed a bug where using --exit-code-from with up would fail if Compose was installed in a Python 3 environment

• Fixed a bug where recreating containers using a combination of tmpfs and volumes would result in an invalid config state

1.12.0

(2017-04-04)

新規機能

Compose file version 3.2

• Introduced version 3.2 of the docker-compose.yml specification

• Added support for cache_from in the build section of services

• Added support for the new expanded ports syntax in service definitions

• Added support for the new expanded volumes syntax in service definitions

Compose file version 2.1

• Added support for pids_limit in service definitions

Compose file version 2.0 and up

• Added --volumes option to docker-compose config that lists named volumes declared for that project

• Added support for mem_reservation in service definitions (2.x only)

• Added support for dns_opt in service definitions (2.x only)

All formats

• Added a new docker-compose images command that lists images used by the current project’s containers

• Added a --stop (shorthand -s) option to docker-compose rm that stops the running containers before removing them

• Added a --resolve-image-digests option to docker-compose config that pins the image version for each service to a permanent digest

• Added a --exit-code-from SERVICE option to docker-compose up. When used, docker-compose will exit on any container’s exit with the code corresponding to the specified service’s exit code

• Added a --parallel option to docker-compose pull that enables images for multiple services to be pulled simultaneously

• Added a --build-arg option to docker-compose build

• Added a --volume <volume_mapping> (shorthand -v) option to docker-compose run to declare runtime volumes to be mounted

• Added a --project-directory PATH option to docker-compose that will affect path resolution for the project

• When using --abort-on-container-exit in docker-compose up, the exit code for the container that caused the abort will be the exit code of the docker-compose up command

• Users can now configure which path separator character they want to use to separate the COMPOSE_FILE environment value using the COMPOSE_PATH_SEPARATOR environment variable

• Added support for port range to a single port in port mappings, such as 8000-8010:80.

バグフィックス

• docker-compose run --rm now removes anonymous volumes after execution, matching the behavior of docker run --rm.

• Fixed a bug where override files containing port lists would cause a TypeError to be raised

• Fixed a bug where the deploy key would be missing from the output of docker-compose config

• Fixed a bug where scaling services up or down would sometimes re-use obsolete containers

• Fixed a bug where the output of docker-compose config would be invalid if the project declared anonymous volumes

• Variable interpolation now properly occurs in the secrets section of the Compose file

• The secrets section now properly appears in the output of docker-compose config

• Fixed a bug where changes to some networks properties would not be detected against previously created networks

• Fixed a bug where docker-compose would crash when trying to write into a closed pipe

• Fixed an issue where Compose would not pick up on the value of COMPOSE_TLS_VERSION when used in combination with command-line TLS flags

1.11.2

(2017-02-17)

バグフィックス

• Fixed a bug that was preventing secrets configuration from being loaded properly

• Fixed a bug where the docker-compose config command would fail if the config file contained secrets definitions

• Fixed an issue where Compose on some linux distributions would pick up and load an outdated version of the requests library

• Fixed an issue where socket-type files inside a build folder would cause docker-compose to crash when trying to build that service

• Fixed an issue where recursive wildcard patterns ** were not being recognized in .dockerignore files.

1.11.1

(2017-02-09)

バグフィックス

• Fixed a bug where the 3.1 file format was not being recognized as valid by the Compose parser

1.11.0

(2017-02-08)

新規機能

Compose file version 3.1

• Introduced version 3.1 of the docker-compose.yml specification. This version requires Docker Engine 1.13.0 or above. It introduces support for secrets. See the documentation for more information

Compose file version 2.0 and up

• Introduced the docker-compose top command that displays processes running for the different services managed by Compose.

バグフィックス

• Fixed a bug where extending a service defining a healthcheck dictionary would cause docker-compose to error out.

• Fixed an issue where the pid entry in a service definition was being ignored when using multiple Compose files.

1.10.1

(2017-02-01)

バグフィックス

• Fixed an issue where the presence of older versions of the docker-py package would cause unexpected crashes while running Compose

• Fixed an issue where healthcheck dependencies would be lost when using multiple compose files for a project

• Fixed a few issues that made the output of the config command invalid

• Fixed an issue where adding volume labels to v3 Compose files would result in an error

• Fixed an issue on Windows where build context paths containing unicode characters were being improperly encoded

• Fixed a bug where Compose would occasionally crash while streaming logs when containers would stop or restart

1.10.0

(2017-01-18)

新規機能

Compose file version 3.0

• Introduced version 3.0 of the docker-compose.yml specification. This version requires to be used with Docker Engine 1.13 or above and is specifically designed to work with the docker stack commands.

Compose file version 2.1 and up

• Healthcheck configuration can now be done in the service definition using the healthcheck parameter

• Containers dependencies can now be set up to wait on positive healthchecks when declared using depends_on. See the documentation for the updated syntax. Note: This feature will not be ported to version 3 Compose files.

• Added support for the sysctls parameter in service definitions

• Added support for the userns_mode parameter in service definitions

• Compose now adds identifying labels to networks and volumes it creates

Compose file version 2.0 and up

• Added support for the stop_grace_period option in service definitions.

バグフィックス

• Colored output now works properly on Windows.

• Fixed a bug where docker-compose run would fail to set up link aliases in interactive mode on Windows.

• Networks created by Compose are now always made attachable (Compose files v2.1 and up).

• Fixed a bug where falsy values of COMPOSE_CONVERT_WINDOWS_PATHS (0, false, empty value) were being interpreted as true.

• Fixed a bug where forward slashes in some .dockerignore patterns weren’t being parsed correctly on Windows

1.9.0

(2016-11-16)

Breaking changes

• When using Compose with Docker Toolbox/Machine on Windows, volume paths are no longer converted from C:\Users to /c/Users-style by default. To re-enable this conversion so that your volumes keep working, set the environment variable COMPOSE_CONVERT_WINDOWS_PATHS=1. Users of Docker for Windows are not affected and do not need to set the variable.

新規機能

• Interactive mode for docker-compose run and docker-compose exec is now supported on Windows platforms. The docker binary is required to be present on the system for this feature to work.

• Introduced version 2.1 of the docker-compose.yml specification. This version requires to be used with Docker Engine 1.12 or above.
  • Added support for setting volume labels and network labels in docker-compose.yml.
  • Added support for the isolation parameter in service definitions.
  • Added support for link-local IPs in the service networks definitions.
  • Added support for shell-style inline defaults in variable interpolation. The supported forms are ${FOO-default} (fall back if FOO is unset) and ${FOO:-default} (fall back if FOO is unset or empty).

• Added support for the group_add and oom_score_adj parameters in service definitions.

• Added support for the internal and enable_ipv6 parameters in network definitions.

• Compose now defaults to using the npipe protocol on Windows.

• Overriding a logging configuration will now properly merge the options mappings if the driver values do not conflict.

バグフィックス

• Fixed several bugs related to npipe protocol support on Windows.

• Fixed an issue with Windows paths being incorrectly converted when using Docker on Windows Server.

• Fixed a bug where an empty restart value would sometimes result in an exception being raised.

• Fixed an issue where service logs containing unicode characters would sometimes cause an error to occur.

• Fixed a bug where unicode values in environment variables would sometimes raise a unicode exception when retrieved.

• Fixed an issue where Compose would incorrectly detect a configuration mismatch for overlay networks.

1.8.1

(2016-09-22)

バグフィックス

• Fixed a bug where users using a credentials store were not able to access their private images.

• Fixed a bug where users using identity tokens to authenticate were not able to access their private images.

• Fixed a bug where an HttpHeaders entry in the docker configuration file would cause Compose to crash when trying to build an image.

• Fixed a few bugs related to the handling of Windows paths in volume binding declarations.

• Fixed a bug where Compose would sometimes crash while trying to read a streaming response from the engine.

• Fixed an issue where Compose would crash when encountering an API error while streaming container logs.

• Fixed an issue where Compose would erroneously try to output logs from drivers not handled by the Engine’s API.

• Fixed a bug where options from the docker-machine config command would not be properly interpreted by Compose.

• Fixed a bug where the connection to the Docker Engine would sometimes fail when running a large number of services simultaneously.

• Fixed an issue where Compose would sometimes print a misleading suggestion message when running the bundle command.

• Fixed a bug where connection errors would not be handled properly by Compose during the project initialization phase.

• Fixed a bug where a misleading error would appear when encountering a connection timeout.

1.8.0

(2016-06-14)

Breaking Changes

• As announced in 1.7.0, docker-compose rm now removes containers created by docker-compose run by default.

• Setting entrypoint on a service now empties out any default command that was set on the image (i.e. any CMD instruction in the Dockerfile used to build it). This makes it consistent with the --entrypoint flag to docker run.

新規機能

• Added docker-compose bundle, a command that builds a bundle file to be consumed by the new Docker Stack commands in Docker 1.12.

• Added docker-compose push, a command that pushes service images to a registry.

• Compose now supports specifying a custom TLS version for interaction with the Docker Engine using the COMPOSE_TLS_VERSION environment variable.

バグフィックス

• Fixed a bug where Compose would erroneously try to read .env at the project’s root when it is a directory.

• docker-compose run -e VAR now passes VAR through from the shell to the container, as with docker run -e VAR.

• Improved config merging when multiple compose files are involved for several service sub-keys.

• Fixed a bug where volume mappings containing Windows drives would sometimes be parsed incorrectly.

• Fixed a bug in Windows environment where volume mappings of the host’s root directory would be parsed incorrectly.

• Fixed a bug where docker-compose config would output an invalid Compose file if external networks were specified.

• Fixed an issue where unset buildargs would be assigned a string containing 'None' instead of the expected empty value.

• Fixed a bug where yes/no prompts on Windows would not show before receiving input.

• Fixed a bug where trying to docker-compose exec on Windows without the -d option would exit with a stacktrace. This will still fail for the time being, but should do so gracefully.

• Fixed a bug where errors during docker-compose up would show an unrelated stacktrace at the end of the process.

• docker-compose create and docker-compose start show more descriptive error messages when something goes wrong.

1.7.1

(2016-05-04)

バグフィックス

• Fixed a bug where the output of docker-compose config for v1 files would be an invalid configuration file.

• Fixed a bug where docker-compose config would not check the validity of links.

• Fixed an issue where docker-compose help would not output a list of available commands and generic options as expected.

• Fixed an issue where filtering by service when using docker-compose logs would not apply for newly created services.

• Fixed a bug where unchanged services would sometimes be recreated in in the up phase when using Compose with Python 3.

• Fixed an issue where API errors encountered during the up phase would not be recognized as a failure state by Compose.

• Fixed a bug where Compose would raise a NameError because of an undefined exception name on non-Windows platforms.

• Fixed a bug where the wrong version of docker-py would sometimes be installed alongside Compose.

• Fixed a bug where the host value output by docker-machine config default would not be recognized as valid options by the docker-compose command line.

• Fixed an issue where Compose would sometimes exit unexpectedly while reading events broadcasted by a Swarm cluster.

• Corrected a statement in the docs about the location of the .env file, which is indeed read from the current directory, instead of in the same location as the Compose file.

1.7.0

(2016-04-13)

Breaking Changes

• docker-compose logs no longer follows log output by default. It now matches the behavior of docker logs and exits after the current logs are printed. Use -f to get the old default behavior.

• Booleans are no longer allows as values for mappings in the Compose file (for keys environment, labels and extra_hosts). Previously this was a warning. Boolean values should be quoted so they become string values.

新規機能

• Compose now looks for a .env file in the directory where it’s run and reads any environment variables defined inside, if they’re not already set in the shell environment. This lets you easily set defaults for variables used in the Compose file, or for any of the COMPOSE_* or DOCKER_* variables.

• Added a --remove-orphans flag to both docker-compose up and docker-compose down to remove containers for services that were removed from the Compose file.

• Added a --all flag to docker-compose rm to include containers created by docker-compose run. This will become the default behavior in the next version of Compose.

• Added support for all the same TLS configuration flags used by the docker client: --tls, --tlscert, --tlskey, etc.

• Compose files now support the tmpfs and shm_size options.

• Added the --workdir flag to docker-compose run

• docker-compose logs now shows logs for new containers that are created after it starts.

• The COMPOSE_FILE environment variable can now contain multiple files, separated by the host system’s standard path separator (: on Mac/Linux, ; on Windows).

• You can now specify a static IP address when connecting a service to a network with the ipv4_address and ipv6_address options.

• Added --follow, --timestamp, and --tail flags to the docker-compose logs command.

• docker-compose up, and docker-compose start will now start containers in parallel where possible.

• docker-compose stop now stops containers in reverse dependency order instead of all at once.

• Added the --build flag to docker-compose up to force it to build a new image. It now shows a warning if an image is automatically built when the flag is not used.

• Added the docker-compose exec command for executing a process in a running container.

バグフィックス

• docker-compose down now removes containers created by docker-compose run.

• A more appropriate error is shown when a timeout is hit during up when using a tty.

• Fixed a bug in docker-compose down where it would abort if some resources had already been removed.

• Fixed a bug where changes to network aliases would not trigger a service to be recreated.

• Fix a bug where a log message was printed about creating a new volume when it already existed.

• Fixed a bug where interrupting up would not always shut down containers.

• Fixed a bug where log_opt and log_driver were not properly carried over when extending services in the v1 Compose file format.

• Fixed a bug where empty values for build args would cause file validation to fail.

1.6.2

(2016-02-23)

• Fixed a bug where connecting to a TLS-enabled Docker Engine would fail with a certificate verification error.

1.6.1

(2016-02-23)

バグフィックス

• Fixed a bug where recreating a container multiple times would cause the new container to be started without the previous volumes.

• Fixed a bug where Compose would set the value of unset environment variables to an empty string, instead of a key without a value.

• Provide a better error message when Compose requires a more recent version of the Docker API.

• Add a missing config field network.aliases which allows setting a network scoped alias for a service.

• Fixed a bug where run would not start services listed in depends_on.

• Fixed a bug where networks and network_mode where not merged when using extends or multiple Compose files.

• Fixed a bug with service aliases where the short container id alias was only contained 10 characters, instead of the 12 characters used in previous versions.

• Added a missing log message when creating a new named volume.

• Fixed a bug where build.args was not merged when using extends or multiple Compose files.

• Fixed some bugs with config validation when null values or incorrect types were used instead of a mapping.

• Fixed a bug where a build section without a context would show a stack trace instead of a helpful validation message.

• Improved compatibility with swarm by only setting a container affinity to the previous instance of a services’ container when the service uses an anonymous container volume. Previously the affinity was always set on all containers.

• Fixed the validation of some driver_opts would cause an error if a number was used instead of a string.

• Some improvements to the run.sh script used by the Compose container install option.

• Fixed a bug with up --abort-on-container-exit where Compose would exit, but would not stop other containers.

• Corrected the warning message that is printed when a boolean value is used as a value in a mapping.

1.6.0

(2016-01-15)

Major Features:

• Compose 1.6 introduces a new format for docker-compose.yml which lets you define networks and volumes in the Compose file as well as services. It also makes a few changes to the structure of some configuration options.

  You don’t have to use it - your existing Compose files will run on Compose 1.6 exactly as they do today.

  Check the upgrade guide for full details: https://docs.docker.com/compose/compose-file#upgrading

• Support for networking has exited experimental status and is the recommended way to enable communication between containers.

  If you use the new file format, your app will use networking. If you aren’t ready yet, just leave your Compose file as it is and it’ll continue to work just the same.

  By default, you don’t have to configure any networks. In fact, using networking with Compose involves even less configuration than using links. Consult the networking guide for how to use it: https://docs.docker.com/compose/networking

  The experimental flags --x-networking and --x-network-driver, introduced in Compose 1.5, have been removed.

• You can now pass arguments to a build if you’re using the new file format:

  build:
    context: .
    args:
      buildno: 1
  

• You can now specify both a build and an image key if you’re using the new file format. docker-compose build will build the image and tag it with the name you’ve specified, while docker-compose pull will attempt to pull it.

• There’s a new events command for monitoring container events from the application, much like docker events. This is a good primitive for building tools on top of Compose for performing actions when particular things happen, such as containers starting and stopping.

• There’s a new depends_on option for specifying dependencies between services. This enforces the order of startup, and ensures that when you run docker-compose up SERVICE on a service with dependencies, those are started as well.

新規機能

• Added a new command config which validates and prints the Compose configuration after interpolating variables, resolving relative paths, and merging multiple files and extends.

• Added a new command create for creating containers without starting them.

• Added a new command down to stop and remove all the resources created by up in a single command.

• Added support for the cpu_quota configuration option.

• Added support for the stop_signal configuration option.

• Commands start, restart, pause, and unpause now exit with an error status code if no containers were modified.

• Added a new --abort-on-container-exit flag to up which causes up to stop all container and exit once the first container exits.

• Removed support for FIG_FILE, FIG_PROJECT_NAME, and no longer reads fig.yml as a default Compose file location.

• Removed the migrate-to-labels command.

• Removed the --allow-insecure-ssl flag.

バグフィックス

• Fixed a validation bug that prevented the use of a range of ports in the expose field.

• Fixed a validation bug that prevented the use of arrays in the entrypoint field if they contained duplicate entries.

• Fixed a bug that caused ulimits to be ignored when used with extends.

• Fixed a bug that prevented ipv6 addresses in extra_hosts.

• Fixed a bug that caused extends to be ignored when included from multiple Compose files.

• Fixed an incorrect warning when a container volume was defined in the Compose file.

• Fixed a bug that prevented the force shutdown behavior of up and logs.

• Fixed a bug that caused None to be printed as the network driver name when the default network driver was used.

• Fixed a bug where using the string form of dns or dns_search would cause an error.

• Fixed a bug where a container would be reported as “Up” when it was in the restarting state.

• Fixed a confusing error message when DOCKER_CERT_PATH was not set properly.

• Fixed a bug where attaching to a container would fail if it was using a non-standard logging driver (or none at all).

1.5.2

(2015-12-03)

• Fixed a bug which broke the use of environment and env_file with extends, and caused environment keys without values to have a None value, instead of a value from the host environment.

• Fixed a regression in 1.5.1 that caused a warning about volumes to be raised incorrectly when containers were recreated.

• Fixed a bug which prevented building a Dockerfile that used ADD <url>

• Fixed a bug with docker-compose restart which prevented it from starting stopped containers.

• Fixed handling of SIGTERM and SIGINT to properly stop containers

• Add support for using a url as the value of build

• Improved the validation of the expose option

1.5.1

(2015-11-12)

• Add the --force-rm option to build.

• Add the ulimit option for services in the Compose file.

• Fixed a bug where up would error with “service needs to be built” if a service changed from using image to using build.

• Fixed a bug that would cause incorrect output of parallel operations on some terminals.

• Fixed a bug that prevented a container from being recreated when the mode of a volumes_from was changed.

• Fixed a regression in 1.5.0 where non-utf-8 unicode characters would cause up or logs to crash.

• Fixed a regression in 1.5.0 where Compose would use a success exit status code when a command fails due to an HTTP timeout communicating with the docker daemon.

• Fixed a regression in 1.5.0 where name was being accepted as a valid service option which would override the actual name of the service.

• When using --x-networking Compose no longer sets the hostname to the container name.

• When using --x-networking Compose will only create the default network if at least one container is using the network.

• When printings logs during up or logs, flush the output buffer after each line to prevent buffering issues from hiding logs.

• Recreate a container if one of its dependencies is being created. Previously a container was only recreated if it’s dependencies already existed, but were being recreated as well.

• Add a warning when a volume in the Compose file is being ignored and masked by a container volume from a previous container.

• Improve the output of pull when run without a tty.

• When using multiple Compose files, validate each before attempting to merge them together. Previously invalid files would result in not helpful errors.

• Allow dashes in keys in the environment service option.

• Improve validation error messages by including the filename as part of the error message.

1.5.0

(2015-11-03)

Breaking changes

With the introduction of variable substitution support in the Compose file, any Compose file that uses an environment variable ($VAR or ${VAR}) in the command: or entrypoint: field will break.

Previously these values were interpolated inside the container, with a value from the container environment. In Compose 1.5.0, the values will be interpolated on the host, with a value from the host environment.

To migrate a Compose file to 1.5.0, escape the variables with an extra $ (ex: $$VAR or $${VAR}). See https://github.com/docker/compose/blob/8cc8e61/docs/compose-file.md#variable-substitution

Major features

• Compose is now available for Windows.

• Environment variables can be used in the Compose file. See https://github.com/docker/compose/blob/8cc8e61/docs/compose-file.md#variable-substitution

• Multiple compose files can be specified, allowing you to override settings in the default Compose file. See https://github.com/docker/compose/blob/8cc8e61/docs/reference/docker-compose.md for more details.

• Compose now produces better error messages when a file contains invalid configuration.

• up now waits for all services to exit before shutting down, rather than shutting down as soon as one container exits.

• Experimental support for the new docker networking system can be enabled with the --x-networking flag. Read more here: https://github.com/docker/docker/blob/8fee1c20/docs/userguide/dockernetworks.md

新規機能

• You can now optionally pass a mode to volumes_from. For example, volumes_from: ["servicename:ro"].

• Since Docker now lets you create volumes with names, you can refer to those volumes by name in docker-compose.yml. For example, volumes: ["mydatavolume:/data"] will mount the volume named mydatavolume at the path /data inside the container.

  If the first component of an entry in volumes starts with a ., / or ~, it is treated as a path and expansion of relative paths is performed as necessary. Otherwise, it is treated as a volume name and passed straight through to Docker.

  Read more on named volumes and volume drivers here: https://github.com/docker/docker/blob/244d9c33/docs/userguide/dockervolumes.md

• docker-compose build --pull instructs Compose to pull the base image for each Dockerfile before building.

• docker-compose pull --ignore-pull-failures instructs Compose to continue if it fails to pull a single service’s image, rather than aborting.

• You can now specify an IPC namespace in docker-compose.yml with the ipc option.

• Containers created by docker-compose run can now be named with the --name flag.

• If you install Compose with pip or use it as a library, it now works with Python 3.

• image now supports image digests (in addition to ids and tags). For example, image: "busybox@sha256:38a203e1986cf79639cfb9b2e1d6e773de84002feea2d4eb006b52004ee8502d"

• ports now supports ranges of ports. For example,

  ports:
    - "3000-3005"
    - "9000-9001:8000-8001"
  

• docker-compose run now supports a -p|--publish parameter, much like docker run -p, for publishing specific ports to the host.

• docker-compose pause and docker-compose unpause have been implemented, analogous to docker pause and docker unpause.

• When using extends to copy configuration from another service in the same Compose file, you can omit the file option.

• Compose can be installed and run as a Docker image. This is an experimental feature.

バグフィックス

• All values for the log_driver option which are supported by the Docker daemon are now supported by Compose.

• docker-compose build can now be run successfully against a Swarm cluster.

1.4.2

(2015-09-22)

• Fixed a regression in the 1.4.1 release that would cause docker-compose up without the -d option to exit immediately.

1.4.1

(2015-09-10)

バグフィックス

• Some configuration changes (notably changes to links, volumes_from, and net) were not properly triggering a container recreate as part of docker-compose up.
• docker-compose up <service> was showing logs for all services instead of just the specified services.
• Containers with custom container names were showing up in logs as service_number instead of their custom container name.
• When scaling a service sometimes containers would be recreated even when the configuration had not changed.

1.4.0

(2015-08-04)

• By default, docker-compose up now only recreates containers for services whose configuration has changed since they were created. This should result in a dramatic speed-up for many applications.

  The experimental --x-smart-recreate flag which introduced this feature in Compose 1.3.0 has been removed, and a --force-recreate flag has been added for when you want to recreate everything.

• Several of Compose’s commands - scale, stop, kill and rm - now perform actions on multiple containers in parallel, rather than in sequence, which will run much faster on larger applications.

• You can now specify a custom name for a service’s container with container_name. Because Docker container names must be unique, this means you can’t scale the service beyond one container.

• You no longer have to specify a file option when using extends - it will default to the current file.

• Service names can now contain dots, dashes and underscores.

• Compose can now read YAML configuration from standard input, rather than from a file, by specifying - as the filename. This makes it easier to generate configuration dynamically:

  $ echo 'redis: {"image": "redis"}' | docker-compose --file - up
  

• There’s a new docker-compose version command which prints extended information about Compose’s bundled dependencies.

• docker-compose.yml now supports log_opt as well as log_driver, allowing you to pass extra configuration to a service’s logging driver.

• docker-compose.yml now supports memswap_limit, similar to docker run --memory-swap.

• When mounting volumes with the volumes option, you can now pass in any mode supported by the daemon, not just :ro or :rw. For example, SELinux users can pass :z or :Z.

• You can now specify a custom volume driver with the volume_driver option in docker-compose.yml, much like docker run --volume-driver.

• A bug has been fixed where Compose would fail to pull images from private registries serving plain (unsecured) HTTP. The --allow-insecure-ssl flag, which was previously used to work around this issue, has been deprecated and now has no effect.

• A bug has been fixed where docker-compose build would fail if the build depended on a private Hub image or an image from a private registry.

• A bug has been fixed where Compose would crash if there were containers which the Docker daemon had not finished removing.

• Two bugs have been fixed where Compose would sometimes fail with a “Duplicate bind mount” error, or fail to attach volumes to a container, if there was a volume path specified in docker-compose.yml with a trailing slash.

Thanks @mnowster, @dnephin, @ekristen, @funkyfuture, @jeffk and @lukemarsden!

1.3.3

(2015-07-15)

Regression fixes

• When stopping containers gracefully, Compose was setting the timeout to 0, effectively forcing a SIGKILL every time.
• Compose would sometimes crash depending on the formatting of container data returned from the Docker API.

1.3.2

(2015-07-14)

バグフィックス

• When there were one-off containers created by running docker-compose run on an older version of Compose, docker-compose run would fail with a name collision. Compose now shows an error if you have leftover containers of this type lying around, and tells you how to remove them.
• Compose was not reading Docker authentication config files created in the new location, ~/docker/config.json, and authentication against private registries would therefore fail.
• When a container had a pseudo-TTY attached, its output in docker-compose up would be truncated.
• docker-compose up --x-smart-recreate would sometimes fail when an image tag was updated.
• docker-compose up would sometimes create two containers with the same numeric suffix.
• docker-compose rm and docker-compose ps would sometimes list services that aren’t part of the current project (though no containers were erroneously removed).
• Some docker-compose commands would not show an error if invalid service names were passed in.

Thanks @dano, @josephpage, @kevinsimper, @lieryan, @phemmer, @soulrebel and @sschepens!

1.3.1

(2015-06-21)

バグフィックス

• docker-compose build would always attempt to pull the base image before building.
• docker-compose help migrate-to-labels failed with an error.
• If no network mode was specified, Compose would set it to “bridge”, rather than allowing the Docker daemon to use its configured default network mode.

1.3.0

(2015-06-18)

Important notes

• This release contains breaking changes, and you will need to either remove or migrate your existing containers before running your app - see the upgrading section of the install docs for details.

• Compose now requires Docker 1.6.0 or later.

Improvements

• Compose now uses container labels, rather than names, to keep track of containers. This makes Compose both faster and easier to integrate with your own tools.

• Compose no longer uses “intermediate containers” when recreating containers for a service. This makes docker-compose up less complex and more resilient to failure.

新規機能

• docker-compose up has an experimental new behavior: it will only recreate containers for services whose configuration has changed in docker-compose.yml. This will eventually become the default, but for now you can take it for a spin:

    $ docker-compose up --x-smart-recreate
  

• When invoked in a subdirectory of a project, docker-compose will now climb up through parent directories until it finds a docker-compose.yml.

Several new configuration keys have been added to docker-compose.yml:

• dockerfile, like docker build --file, lets you specify an alternate Dockerfile to use with build.
• labels, like docker run --labels, lets you add custom metadata to containers.
• extra_hosts, like docker run --add-host, lets you add entries to a container’s /etc/hosts file.
• pid: host, like docker run --pid=host, lets you reuse the same PID namespace as the host machine.
• cpuset, like docker run --cpuset-cpus, lets you specify which CPUs to allow execution in.
• read_only, like docker run --read-only, lets you mount a container’s filesystem as read-only.
• security_opt, like docker run --security-opt, lets you specify security options.
• log_driver, like docker run --log-driver, lets you specify a log driver.

バグフィックス

• The output of docker-compose run was sometimes truncated, especially when running under Jenkins.
• A service’s volumes would sometimes not update after volume configuration was changed in docker-compose.yml.
• Authenticating against third-party registries would sometimes fail.
• docker-compose run --rm would fail to remove the container if the service had a restart policy in place.
• docker-compose scale would refuse to scale a service beyond 1 container if it exposed a specific port number on the host.
• Compose would refuse to create multiple volume entries with the same host path.

Thanks @ahromis, @albers, @aleksandr-vin, @antoineco, @ccverak, @chernjie, @dnephin, @edmorley, @fordhurley, @josephpage, @KyleJamesWalker, @lsowen, @mchasal, @noironetworks, @sdake, @sdurrheimer, @sherter, @stephenlawrence, @thaJeztah, @thieman, @turtlemonvh, @twhiteman, @vdemeester, @xuxinkun and @zwily!

1.2.0

(2015-04-16)

• docker-compose.yml now supports an extends option, which enables a service to inherit configuration from another service in another configuration file. This is really good for sharing common configuration between apps, or for configuring the same app for different environments. Here’s the documentation.

• When using Compose with a Swarm cluster, containers that depend on one another will be co-scheduled on the same node. This means that most Compose apps will now work out of the box, as long as they don’t use build.

• Repeated invocations of docker-compose up when using Compose with a Swarm cluster now work reliably.

• Directories passed to build, filenames passed to env_file and volume host paths passed to volumes are now treated as relative to the directory of the configuration file, not the directory that docker-compose is being run in. In the majority of cases, those are the same, but if you use the -f|--file argument to specify a configuration file in another directory, this is a breaking change.

• A service can now share another service’s network namespace with net: container:<service>.

• volumes_from and net: container:<service> entries are taken into account when resolving dependencies, so docker-compose up <service> will correctly start all dependencies of <service>.

• docker-compose run now accepts a --user argument to specify a user to run the command as, just like docker run.

• The up, stop and restart commands now accept a --timeout (or -t) argument to specify how long to wait when attempting to gracefully stop containers, just like docker stop.

• docker-compose rm now accepts -f as a shorthand for --force, just like docker rm.

Thanks, @abesto, @albers, @alunduil, @dnephin, @funkyfuture, @gilclark, @IanVS, @KingsleyKelly, @knutwalker, @thaJeztah and @vmalloc!

1.1.0

(2015-02-25)

Fig has been renamed to Docker Compose, or just Compose for short. This has several implications for you:

• The command you type is now docker-compose, not fig.
• You should rename your fig.yml to docker-compose.yml.
• If you’re installing via PyPI, the package is now docker-compose, so install it with pip install docker-compose.

Besides that, there’s a lot of new stuff in this release:

• We’ve made a few small changes to ensure that Compose will work with Swarm, Docker’s new clustering tool (https://github.com/docker/swarm). Eventually you’ll be able to point Compose at a Swarm cluster instead of a standalone Docker host and it’ll run your containers on the cluster with no extra work from you. As Swarm is still developing, integration is rough and lots of Compose features don’t work yet.

• docker-compose run now has a --service-ports flag for exposing ports on the given service. This is useful for running your webapp with an interactive debugger, for example.

• You can now link to containers outside your app with the external_links option in docker-compose.yml.

• You can now prevent docker-compose up from automatically building images with the --no-build option. This will make fewer API calls and run faster.

• If you don’t specify a tag when using the image key, Compose will default to the latest tag, rather than pulling all tags.

• docker-compose kill now supports the -s flag, allowing you to specify the exact signal you want to send to a service’s containers.

• docker-compose.yml now has an env_file key, analogous to docker run --env-file, letting you specify multiple environment variables in a separate file. This is great if you have a lot of them, or if you want to keep sensitive information out of version control.

• docker-compose.yml now supports the dns_search, cap_add, cap_drop, cpu_shares and restart options, analogous to docker run’s --dns-search, --cap-add, --cap-drop, --cpu-shares and --restart options.

• Compose now ships with Bash tab completion - see the installation and usage docs at https://github.com/docker/compose/blob/1.1.0/docs/completion.md

• A number of bugs have been fixed - see the milestone for details: https://github.com/docker/compose/issues?q=milestone%3A1.1.0+

Thanks @dnephin, @squebe, @jbalonso, @raulcd, @benlangfield, @albers, @ggtools, @bersace, @dtenenba, @petercv, @drewkett, @TFenby, @paulRbr, @Aigeruth and @salehe!

1.0.1

(2014-11-04)

• Added an --allow-insecure-ssl option to allow fig up, fig run and fig pull to pull from insecure registries.
• Fixed fig run not showing output in Jenkins.
• Fixed a bug where Fig couldn’t build Dockerfiles with ADD statements pointing at URLs.

1.0.0

(2014-10-16)

The highlights:

• Fig has joined Docker. Fig will continue to be maintained, but we’ll also be incorporating the best bits of Fig into Docker itself.

  This means the GitHub repository has moved to https://github.com/docker/fig and our IRC channel is now #docker-fig on Freenode.

• Fig can be used with the official Docker OS X installer. Boot2Docker will mount the home directory from your host machine so volumes work as expected.

• Fig supports Docker 1.3.

• It is now possible to connect to the Docker daemon using TLS by using the DOCKER_CERT_PATH and DOCKER_TLS_VERIFY environment variables.

• There is a new fig port command which outputs the host port binding of a service, in a similar way to docker port.

• There is a new fig pull command which pulls the latest images for a service.

• There is a new fig restart command which restarts a service’s containers.

• Fig creates multiple containers in service by appending a number to the service name. For example, db_1, db_2. As a convenience, Fig will now give the first container an alias of the service name. For example, db.

  This link alias is also a valid hostname and added to /etc/hosts so you can connect to linked services using their hostname. For example, instead of resolving the environment variables DB_PORT_5432_TCP_ADDR and DB_PORT_5432_TCP_PORT, you could just use the hostname db and port 5432 directly.

• Volume definitions now support ro mode, expanding ~ and expanding environment variables.

• .dockerignore is supported when building.

• The project name can be set with the FIG_PROJECT_NAME environment variable.

• The --env and --entrypoint options have been added to fig run.

• The Fig binary for Linux is now linked against an older version of glibc so it works on CentOS 6 and Debian Wheezy.

Other things:

• fig ps now works on Jenkins and makes fewer API calls to the Docker daemon.
• --verbose displays more useful debugging output.
• When starting a service where volumes_from points to a service without any containers running, that service will now be started.
• Lots of docs improvements. Notably, environment variables are documented and official repositories are used throughout.

Thanks @dnephin, @d11wtq, @marksteve, @rubbish, @jbalonso, @timfreund, @alunduil, @mieciu, @shuron, @moss, @suzaku and @chmouel! Whew.

0.5.2

(2014-07-28)

• Added a --no-cache option to fig build, which bypasses the cache just like docker build --no-cache.
• Fixed the dns: fig.yml option, which was causing fig to error out.
• Fixed a bug where fig couldn’t start under Python 2.6.
• Fixed a log-streaming bug that occasionally caused fig to exit.

Thanks @dnephin and @marksteve!

0.5.1

(2014-07-11)

• If a service has a command defined, fig run [service] with no further arguments will run it.
• The project name now defaults to the directory containing fig.yml, not the current working directory (if they’re different)
• volumes_from now works properly with containers as well as services
• Fixed a race condition when recreating containers in fig up

Thanks @ryanbrainard and @d11wtq!

0.5.0

(2014-07-11)

• Fig now starts links when you run fig run or fig up.

  For example, if you have a web service which depends on a db service, fig run web ... will start the db service.

• Environment variables can now be resolved from the environment that Fig is running in. Just specify it as a blank variable in your fig.yml and, if set, it’ll be resolved:

  environment:
    RACK_ENV: development
    SESSION_SECRET:
  

• volumes_from is now supported in fig.yml. All of the volumes from the specified services and containers will be mounted:

  volumes_from:
   - service_name
   - container_name
  

• A host address can now be specified in ports:

  ports:
   - "0.0.0.0:8000:8000"
   - "127.0.0.1:8001:8001"
  

• The net and workdir options are now supported in fig.yml.
• The hostname option now works in the same way as the Docker CLI, splitting out into a domainname option.
• TTY behavior is far more robust, and resizes are supported correctly.
• Load YAML files safely.

Thanks to @d11wtq, @ryanbrainard, @rail44, @j0hnsmith, @binarin, @Elemecca, @mozz100 and @marksteve for their help with this release!

0.4.2

(2014-06-18)

• Fix various encoding errors when using fig run, fig up and fig build.

0.4.1

(2014-05-08)

• Add support for Docker 0.11.0. (Thanks @marksteve!)
• Make project name configurable. (Thanks @jefmathiot!)
• Return correct exit code from fig run.

0.4.0

(2014-04-29)

• Support Docker 0.9 and 0.10
• Display progress bars correctly when pulling images (no more ski slopes)
• fig up now stops all services when any container exits
• Added support for the privileged config option in fig.yml (thanks @kvz!)
• Shortened and aligned log prefixes in fig up output
• Only containers started with fig run link back to their own service
• Handle UTF-8 correctly when streaming fig build/run/up output (thanks @mauvm and @shanejonas!)
• Error message improvements

0.3.2

(2014-03-05)

• Added an --rm option to fig run. (Thanks @marksteve!)
• Added an expose option to fig.yml.

0.3.1

(2014-03-04)

• Added contribution instructions. (Thanks @kvz!)
• Fixed fig rm throwing an error.
• Fixed a bug in fig ps on Docker 0.8.1 when there is a container with no command.

0.3.0

(2014-03-03)

• We now ship binaries for OS X and Linux. No more having to install with Pip!
• Add -f flag to specify alternate fig.yml files
• Add support for custom link names
• Fix a bug where recreating would sometimes hang
• Update docker-py to support Docker 0.8.0.
• Various documentation improvements
• Various error message improvements

Thanks @marksteve, @Gazler and @teozkr!

0.2.2

(2014-02-17)

• Resolve dependencies using Cormen/Tarjan topological sort
• Fix fig up not printing log output
• Stop containers in reverse order to starting
• Fix scale command not binding ports

Thanks to @barnybug and @dustinlacewell for their work on this release.

0.2.1

(2014-02-04)

• General improvements to error reporting (#77, #79)

0.2.0

(2014-01-31)

• Link services to themselves so run commands can access the running service. (#67)
• Much better documentation.
• Make service dependency resolution more reliable. (#48)
• Load Fig configurations with a .yaml extension. (#58)

Big thanks to @cameronmaske, @mrchrisadams and @damianmoore for their help with this release.

0.1.4

(2014-01-27)

• Add a link alias without the project name. This makes the environment variables a little shorter: REDIS_1_PORT_6379_TCP_ADDR. (#54)

0.1.3

(2014-01-23)

• Fix ports sometimes being configured incorrectly. (#46)
• Fix log output sometimes not displaying. (#47)

0.1.2

(2014-01-22)

• Add -T option to fig run to disable pseudo-TTY. (#34)
• Fix fig up requiring the ubuntu image to be pulled to recreate containers. (#33) Thanks @cameronmaske!
• Improve reliability, fix arrow keys and fix a race condition in fig run. (#34, #39, #40)

0.1.1

(2014-01-17)

• Fix bug where ports were not exposed correctly (#29). Thanks @dustinlacewell!

0.1.0

(2014-01-16)

• Containers are recreated on each fig up, ensuring config is up-to-date with fig.yml (#2)
• Add fig scale command (#9)
• Use DOCKER_HOST environment variable to find Docker daemon, for consistency with the official Docker client (was previously DOCKER_URL) (#19)
• Truncate long commands in fig ps (#18)
• Fill out CLI help banners for commands (#15, #16)
• Show a friendlier error when fig.yml is missing (#4)
• Fix bug with fig build logging (#3)
• Fix bug where builds would time out if a step took a long time without generating output (#6)
• Fix bug where streaming container output over the Unix socket raised an error (#7)

Big thanks to @tomstuart, @EnTeQuAk, @schickling, @aronasorman and @GeoffreyPlitt.

0.0.2

(2014-01-02)

• Improve documentation
• Try to connect to Docker on tcp://localdocker:4243 and a UNIX socket in addition to localhost.
• Improve fig up behavior
• Add confirmation prompt to fig rm
• Add fig build command

0.0.1

(2013-12-20)

Initial release.